Introduction for angle type globe valve and needle valves

The angle globe valve have anther name is angle stop valve,OS & Y Type, Rising Stem, Bolted Bonnet  ASA / ND Design

The angle globe Valves from our comapny are outside screw, rising Stem, bolted bonnet cnstruction, threads are away from the line fluid and easy to lubricate.normal stop valve,the inlet and outlet on a straight line,but the inlet of the angle type globe valve and outlet of the angle type globe valve are perpendicular to each other,so the resistance coefficient of fluid for angle globe valve is higher than conventional globe valves. so the angle type globe valve on can used for vertical installation.

The angle globe valves are generally available with plug type disc and slap type disc, they also are the forging, so it is very strong, the disc can  rotate around itself,so it no need with the stem rotate simultaneously ,when the workers open and close the valve(Rotary the stem),this This structure design ensures the disc is not easy to wear . which is designed to give leak tight seating over a long period of in built wear life. the  seat ring of the globe valve is replaceable type, the threaded seat ring which has large taper area that is for ample seating. Two nos. slots are provided on seat ring of body, which is for easy removal for servicing at site. Welded type seat ring & Integral seat ring are also available in globe valve. all of stems are made from solid one piece construction.they also are forging,  the yoke bush of globe valve has a long thread engagement for accurate stem alignment. The standard range of our company's globe valve in sizes of up to 12 (300mm).

Needle Valves are used to reduce the rate of flow in a leg of a pneumatic circuit, consequently slowing actuator speed.  Unlike a Flow Control, a Needle Valve controls flow in both directions (bi-directional).  A finely threaded stem allows the gradual adjustment of the amount of controlled flow passing through the valve.  Flow enters the input port, travels through an orifice sized by the tapered stem and out the output port.