The technology in window and door profiles has advanced significantly in recent years which has enabled windows and doors to be painted different colours inside and out. Less than 1o years ago this was a very difficult process that for many windows and doors could only be achieved by having a polyester powder colour on the one side and an applied foil to give a dual colour effect on the other side.
Today technology enables all types of windows, doors, curtain walling and aluminium panels to be painted different colours inside and out simply and quickly. This has resulted in far more architectural freedom when choosing colour for windows and doors, given homeowners more choice and expanded the possibility for windows to match the inside and outside of a property in different ways.
It is the thermal break technology that has finally enabled the simple dual colour powder coating of aluminium profiles. A thermal break is vitally important to a window section as it provides the thermal bridge between the inside and outside faces and therefore gives the profile its thermal qualities and prevents cold bridging and condensation on the inside.
In previous years the thermal break was referred to as “pour and cut”. This meant that the solid aluminium extrusion was cut and a liquid resin poured in that created the thermal bridge. For powder coating purposes we must remember that the powder coating process itself does not make it possible to paint a complete section two different colours. Therefore with the old pour and cut thermal break dual colours were not possible.
Today technology enables all types of windows, doors, curtain walling and aluminium panels to be painted different colours inside and out simply and quickly. This has resulted in far more architectural freedom when choosing colour for windows and doors, given homeowners more choice and expanded the possibility for windows to match the inside and outside of a property in different ways.
It is the thermal break technology that has finally enabled the simple dual colour powder coating of aluminium profiles. A thermal break is vitally important to a window section as it provides the thermal bridge between the inside and outside faces and therefore gives the profile its thermal qualities and prevents cold bridging and condensation on the inside.
In previous years the thermal break was referred to as “pour and cut”. This meant that the solid aluminium extrusion was cut and a liquid resin poured in that created the thermal bridge. For powder coating purposes we must remember that the powder coating process itself does not make it possible to paint a complete section two different colours. Therefore with the old pour and cut thermal break dual colours were not possible.
※コメント投稿者のブログIDはブログ作成者のみに通知されます