1. Locate the trailer hitch in the rear of the tow rope and in front of the towed vehicle. Many car trailer hook position design in the lower bumper, usually in the vehicle manual marked a clear location, the owner can also be observed by the front and rear bumper found there is hidden space, where the use of circular or square cover covered Location is where the car trailer hook position.
2. Some of the car's trailer hook is split, need to be assembled in use. After removing the cover from the bumper, assemble the carrying hook.
3. Install the trailer tool. Whether the choice of soft or hard trailer tools, installation must ensure that the connection when the car linked to a solid and reliable, towing hook design on the need to lock the security lock in place. Check the front and rear connections again before running the trailer. Soft trailers with no tow hooks at both ends are used to tie loose knots, which can be difficult to unlock if the knuckle is pulled through a great traction.
4. Tractor start with a block, to ensure adequate torque to provide adequate traction, while tractors need to control the speed and maintain a smooth driving, when a little resistance to increase when the power output. Manual models to avoid fierce lift clutch pedal, a semi-joint slow start, so as not to cause damage to the car.
Conventional automotive wheel chocks are composed of two sets of tapered roller bearings or ball bearings combined, bearing the installation, oiling, sealing and clearance adjustment are carried out in the automotive production line. This structure makes it difficult to assemble in the automobile manufacturing plant, high cost, poor reliability, and maintenance of vehicle maintenance point, you also need to clean the bearing, oil and adjustment.
Wheel bearing unit is in the standard angular contact ball bearings and tapered roller bearings developed on the basis of it will be two sets of bearings as a whole, with the assembly of good performance, can be omitted clearance adjustment, light weight, compact structure, load capacity Large, sealed bearings can be pre-loaded with grease, omit the external wheel hub sealing and maintenance-free advantages, has been widely used in cars, in the truck also gradually expand the application trend.
2. Some of the car's trailer hook is split, need to be assembled in use. After removing the cover from the bumper, assemble the carrying hook.
3. Install the trailer tool. Whether the choice of soft or hard trailer tools, installation must ensure that the connection when the car linked to a solid and reliable, towing hook design on the need to lock the security lock in place. Check the front and rear connections again before running the trailer. Soft trailers with no tow hooks at both ends are used to tie loose knots, which can be difficult to unlock if the knuckle is pulled through a great traction.
4. Tractor start with a block, to ensure adequate torque to provide adequate traction, while tractors need to control the speed and maintain a smooth driving, when a little resistance to increase when the power output. Manual models to avoid fierce lift clutch pedal, a semi-joint slow start, so as not to cause damage to the car.
Conventional automotive wheel chocks are composed of two sets of tapered roller bearings or ball bearings combined, bearing the installation, oiling, sealing and clearance adjustment are carried out in the automotive production line. This structure makes it difficult to assemble in the automobile manufacturing plant, high cost, poor reliability, and maintenance of vehicle maintenance point, you also need to clean the bearing, oil and adjustment.
Wheel bearing unit is in the standard angular contact ball bearings and tapered roller bearings developed on the basis of it will be two sets of bearings as a whole, with the assembly of good performance, can be omitted clearance adjustment, light weight, compact structure, load capacity Large, sealed bearings can be pre-loaded with grease, omit the external wheel hub sealing and maintenance-free advantages, has been widely used in cars, in the truck also gradually expand the application trend.
※コメント投稿者のブログIDはブログ作成者のみに通知されます