Mobile repeater installation instructions

EOT mobile repeater is installed, you are not required to lose, eliminating No. disassembly operations. When the end of the column using a mobile repeater mounted on the front side of the ladder and keep the first 20 vehicles. EOT mobile repeater use lithium batteries, open the battery cover, put the battery into the battery compartment in place to move the flash fires to determine whether the repeater power basis; within mobile repeater red button is pressed, the column holding tone Taiwan has made cooing sound code to prove that the device is working properly; when you take the battery first hand bayonet pressed to pull out the battery.

If the radio antenna wires are exposed, stop in the battery compartment opening, mobile repeater set antenna wires inserted into the exposed portion of the gap at the upper part of the body to avoid when installing the battery card off antenna wires, causing the relay does not work, the formation of the end of the column failure, Train Rear affect normal use. Battery installation must be in place, the battery should pop the latch. After the battery is installed, the battery handle flat, top to avoid bad positions locks. After opening the battery door on the right side of the battery compartment has a vertical bar user interface, data acquisition it from top to bottom port,mobile booster eliminating the red button and the number of infrared receiver tube output number.
www.digood.cn

How PSA Nitrogen Generation Works

Ad-sorption is the physical process of separating molecules. Our Pressure Swing Adsorption systems generate nitrogen(PSA nitrogen generator), by separating it from the oxygen in ordinary air.
A vessel containing carbon molecular sieve, or CMS, is filled with compressed air. The smaller oxygen molecules are adsorbed by the sieve material while the larger nitrogen molecules drift past and are collected in a nitrogen receiver.Pressure is then released from the vessel, and the oxygen molecules are vented to the atmosphere. At the same time, the cycle is repeated in a second vessel to provide a flow of gas into the nitrogen receiver.
Readygas is a professional equipment factory, specialised in design and manufacturing of nitrogen and PSA oxygen generator solutions using the Pressure Swing Adsorption (PSA) technology.
With ranging from 95% up to 99.9995%, we provide PSA nitrogen generator that are sure to suit your needs. We takes pride in manufacturing a cost effective, quality, reliable PSA nitrogen generator system engineered to meet our customer's specific applicationReadygas is a professional equipment factory, specialised in design and manufacturing of nitrogen and oxygen generator solutions using the Pressure Swing Adsorption (PSA) technology.
We have advanced modern production workshop and a number of advanced gas separation and mechanical technical experts. Readygas know how rely on many years of experience in the industrial gas industry, which has resulted in systems that are among the most reliable and durable in the industry.
With ranging from 95% up to 99.9995%, we provide PSA Nitrogen Generator that are sure to suit your needs. We takes pride in manufacturing a cost effective, quality, reliable PSA Nitrogen generation system engineered to meet our customer's specific application
www.digood.cn