ライフ、健康

元気で幸せで暮らすため いい生活習慣を身に付けまましょう

THE BENEFITS OF HARVESTING HVAC CONDENSATION

2017-02-23 09:11:39 | 日記
It is a typical, muggy August afternoon in Houston, but Erik Knezevich, P.E., is feeling super-chilled. The former Rice University facilities project manager is standing inside the massive air conditioning unit that cools Brockman Hall for Physics on the north end of campus. The incoming air registers a toasty 88 degrees, but in the instant it takes for it to blow through water-chilled air conditioner (A/C) coils and reach him, it is decreased more than 30 degrees — cold enough to travel inside the building’s ductwork and keep labs, classrooms and offices comfortable.
Anyone who knows Houston understands that high temperatures are just part of the reason air conditioners run feverishly nearly year-round. Couple an average August thermometer reading of 94 degrees with an average relative humidity of 75 percent, and it is easy to see why “air you can wear” is not just a meteorologist’s fanciful turn of phrase for residents of the Bayou City. Under those combined conditions, sweat drenches people, and condensation nearly pours off A/C coils. On a hot, humid day, the amount of condensate produced from the Brockman Hall A/C system equals an astonishing 15 gallons per minute.
In many Houston buildings, HVAC condensate is discarded, simply sent down the sewer. However, at Rice University, a long history of environmental stewardship makes that kind of waste unacceptable.
Instead, the condensate from Brockman Hall and six other buildings is captured and pumped back for reuse on campus, primarily as makeup water for the central plant’s cooling towers. Knezevich figures that Rice recovers about 14 million gallons of water per year, and that is probably a conservative estimate. That means that instead of buying 14 million gallons of treated, potable water from the city to replenish its cooling towers or tapping the university’s own well, Rice saves a precious resource and a considerable amount of money.
According to Knezevich, HVAC condensate recovery has been underway at Rice for about eight years. Some of the buildings were retrofitted to make the process possible; for newer buildings, including Brockman Hall and the BioScience Research Collaborative Building, condensate recovery was incorporated into the design. Knezevich admits that retrofitting is not always economically viable. Of 12 campus buildings considered for HVAC condensate recovery, it only made sense for seven.
“If you have a pipe going from the attic to the basement in an existing building, you’re going to rip up too much of the structure to justify the return on investment,” he says.
In addition, the reused condensate does not totally replace the water required by the cooling towers. Some fresh water will still be needed. According to a report by the San Antonio, Texas, cooling water system, the figure typically ranges from as little as 5 percent to as much as 45 percent with the latter figure reflecting a high-ventilation building such as a laboratory.1 At Rice, the total cooling tower makeup water for the university is about 68 million gallons per year, so the recycled amount represents about 20 percent.
Knezevich, who now operates Galaxy Consulting Engineers, expects that as construction continues on campus, condensate harvesting will be part of the plan. Water recovery, he explains, is part of Leadership in Energy & Environmental Design (LEED) certification — which is administered by the U.S. Green Building Council (USGBC), the benchmark in green building — and Rice is aiming for the LEED Silver level.
As he notes in a YouTube video that promotes Rice University’s condensate recovery efforts, using HVAC condensate instead of potable water in cooling towers is, “putting good water to good use.”

Application of gravity casting

2017-02-22 15:38:48 | 高齢社会
Die casting is carried out in the die-casting machine on the metal-type pressure, is the highest production efficiency of the casting process. Die casting machine is divided into two types of hot chamber die casting machine and cold chamber die casting machine. Hot chamber die casting machine with high degree of automation, less material loss, production efficiency than the cold chamber die casting machine higher, but by the heat resistance of the mechanical constraints, the current can only be used for zinc alloy, magnesium alloy and other low melting materials casting production The Today's widely used aluminum alloy die castings, due to the higher melting point, can only be produced in the cold chamber die casting machine. The main feature of the die-casting is the metal liquid in the high-pressure, high-speed filling cavity, and under high pressure forming, solidification, die casting is the lack of: because the metal liquid in the high-pressure, high-speed filling the cavity process, The air in the cavity wrapped in the casting inside the formation of subcutaneous air holes, so aluminum alloy die casting should not heat treatment, zinc alloy die casting should not be spray (but can paint). Otherwise, the castings internal pores in the above-mentioned treatment of heating, will be subject to thermal expansion caused by casting deformation or bubble. In addition, the die cutting of the mechanical cutting allowance should also be smaller, generally about 0.5mm, can reduce casting weight, reduce the amount of cutting to reduce costs, but also to avoid penetrating the surface dense layer, exposed subcutaneous stomata, resulting in Workpiece scrap.

The resource of CNC Machining Parts

2017-02-22 15:36:38 | 高齢社会
CNC (CNC machine) is a computer numerical control machine (Computer numerical control) for short, is a program controlled by the automation machine. The control system can logically process the program with the control code or other symbol instruction, decode it by the computer, so that the machine can carry out the prescribed action, and the blank material is processed into semi-finished finished parts by cutting tool.
CNC milling machine can be used to process the parts of the plane, inside and outside the contours, holes, threads, etc. Through the two-axis machining parts of the plane contour, through the two-axis semi-three, three-axis or multi-axis linkage to process parts of the space surface.
From the distribution of machine tool movement characteristics, CNC milling machine can also be used as CNC drilling machine or CNC boring machine, complete milling, boring, drilling, expansion, hinge, tapping and other process content.
General CNC machining usually refers to precision machining, CNC machining lathe, CNC machining milling machine, CNC machining boring and milling machine, etc.

Bearing installation method

2017-02-22 15:33:52 | 高齢社会
Normally, the temperature of the imperial bearing starts to rise slowly as the bearing runs, reaching a steady state after 1-2 hours.
The normal temperature of the bearing varies with the heat capacity, heat dissipation, speed and load of the machine.
If the lubrication, installation is not appropriate, the bearing temperature will rise abruptly, there will be abnormal high temperature, then must stop running, take the necessary precautions.
Causes of high temperature bearings include: insufficient lubrication or excessive lubrication, lubricant. Contains impurities, the load is too large, bearing damage ring, lack of gap, and oil seal produced by high friction and so on.
So continuous monitoring of the imperial bearing temperature is necessary, whether it is measuring the bearing itself or other important parts. If the operating conditions are constant, any temperature change may indicate that a fault has occurred.
The importance of the British bearing, meaning that when it is damaged, it will cause the equipment to stop, so this type of bearing should be the best temperature detector installed. Normally, an inch bearing will have a natural temperature rise after just lubrication or re-lubrication and last for one or two days.
Excavator bearing installation and removal methods should be based on excavator bearing structure, size and size of the excavator bearing parts with the nature of the match. Installation, removal of the pressure should be directly added to the tight fit on the end of the excavator bearing gear, can not pass through the excavator bearing rolling body transfer pressure, because it will cause indentation in the excavator bearing surface, affecting the normal work of the excavator bearings, Even the excavator bearing damage. Excavator bearing retainers, seals, dust cover and other parts are easy to deformation, installation or removal of excavator bearing pressure can not be added to these parts.

Bearing installation method

2017-02-22 15:31:58 | 高齢社会
Normally, the temperature of the imperial bearing starts to rise slowly as the bearing runs, reaching a steady state after 1-2 hours.
The normal temperature of the bearing varies with the heat capacity, heat dissipation, speed and load of the machine.
If the lubrication, installation is not appropriate, the bearing temperature will rise abruptly, there will be abnormal high temperature, then must stop running, take the necessary precautions.
Causes of high temperature bearings include: insufficient lubrication or excessive lubrication, lubricant. Contains impurities, the load is too large, bearing damage ring, lack of gap, and oil seal produced by high friction and so on.
So continuous monitoring of the imperial bearing temperature is necessary, whether it is measuring the bearing itself or other important parts. If the operating conditions are constant, any temperature change may indicate that a fault has occurred.
The importance of the British bearing, meaning that when it is damaged, it will cause the equipment to stop, so this type of bearing should be the best temperature detector installed. Normally, an inch bearing will have a natural temperature rise after just lubrication or re-lubrication and last for one or two days.
Excavator bearing installation and removal methods should be based on excavator bearing structure, size and size of the excavator bearing parts with the nature of the match. Installation, removal of the pressure should be directly added to the tight fit on the end of the excavator bearing gear, can not pass through the excavator bearing rolling body transfer pressure, because it will cause indentation in the excavator bearing surface, affecting the normal work of the excavator bearings, Even the excavator bearing damage. Excavator bearing retainers, seals, dust cover and other parts are easy to deformation, installation or removal of excavator bearing pressure can not be added to these parts.