High yield and stability of ultra fine grinding mill can get better benefit

The working process of ultra fine mill for the requirements of the production process is stable, high yield, so as to bring better efficiency and benefit for the entire production line, this point is any users expect to see the effect, but in the actual production process, there are a lot of factors that will make up the machine the steady and high demand, here is to analyze the factors that cause this phenomenon which has the problem.

In general, ultrafine grinding mill in production, in order to achieve high and stable yield effect, not only has a relationship with the entire production line equipment, and also the wear condition of operation of the sealing system, parts of the relationship and the use of lubrication system, so the device can not achieve stable high production requirements, need to start from these to solve.

Different factors are not the same for production, such as sealing system of superfine grinding machine, if the sealing effect is not good, will cause the dust can not overflow, this phenomenon will cause the environment, and dust into the interior of the device and increase the wear at the same time, the lubricating effect is reduced, these the situation, will cause serious wear and tear parts, this phenomenon will, so that they will not help the material good crushing and powder selection process, then there will be decline in efficiency.

In view of this, in the production of superfine grinding process, the need for strict operation, and regular inspection of the sealing and wear factors, and then into the material, must also comply with the requirements of production equipment, in order to reduce wear of the situation, reduce the failure of the production, and the effect on efficiency the.

The article mainly introduces the process of grinding production in fine, factors appear to the stable high yield phenomenon which has the problem above, mainly introduced some elements of the seal system, and other related parts of the wear condition, and then analyzed in the production of proper operation and inspection can reduce the occurrence of wear of the situation, to assist the smooth production, and achieve a better capacity.

Four improvements have improved the Raymond mill structure performance

With the continuous development of the powder industry, the market demand for ultrafine iron Raymond Mill is also increasing. As the main equipment for grinding in the powder industry of China, ultrafine grinding mill of iron ore is an inevitable trend for the development of "high reliability, energy saving, precision and automation".

Due to the problems of low fineness, high power consumption, large noise and low system efficiency, the traditional superfine Raymond mill has been bothering the mineral processing enterprises and the equipment manufacturers of Raymond mill. Shanghai sebang machine mining equipment manufacturing limited liability company after many years of accumulated experience, on the basis of the improvement of Raymond mill, independent research and development and production of a new generation of ore superfine Raymond mill, effectively solves the technical problems of traditional superfine Raymond mill, Raymond mill from the increased price.

Four improvements of the structure of ultrafine Raymond mill are as follows:
First, the structure of the main shaft and the plum blossom frame is conducive to stable structural transformation, so that the operation is stable.

Two. The traditional part of the analysis machine is changed into two isolation from the inside of the hanging cavity of the vertical hanging hoist, which enhances the stability and durability of the machine.

Three. in the grinding zone, the grind material is always gathered in the grinding zone effectively processing, improve grinding efficiency, but also updated the roller structure, the grinding roller and the roller shaft can be complementary in the rotation of the operation, also can make the revolution, its effect and durability.

Four. in the ventilation part, the bellows and the air duct are changed from the original horizontal bottom to 30 degrees to the center, forming a bucket to ensure that the bellows and the air duct are unobstructed and unobstructed, so that the air volume is always maintained, and the host mill is in high efficiency.

The Energy Saving Design of Raymond Mill

Raymond mill is a kind of mineral processing equipment commonly used in mineral processing plant. It is also a high energy consumption equipment. Energy saving design and parameter optimization design of Raymond mill are of great significance to reduce energy consumption and improve beneficiation efficiency.

Raymond mill mainly from the starting mode, lubrication mode, bearing type, liner structure and form, Raymond mill speed ratio and other aspects of energy saving design. Raymond mill is made by state industrial science and technology group. It has many characteristics in energy saving design. The equipment must be operated according to the design requirements in production.

1. Design of starting mode
Soft start pneumatic clutch. It can realize the starting of the synchronous motor Raymond mill, and make the motor start without load. When the speed is stable, the clutch is combined and the Raymond mill is started. This can shorten the starting time of the motor itself, start easily, reduce the impact of the starting current on the power grid, and also reduce the installed power of Raymond mill.

2. hydrostatic bearing and static and dynamic pressure bearing design
It is a common design for Raymond mill to use dynamic and static pressure mixed lubrication bearings instead of ordinary bearings..

(1) in the Raymond mill before starting, high pressure using lubricating oil will float the shaft neck of 0.2 ~ 0.3mm, it can greatly reduce the starting load, and then start, after which can make the shaft and bearing by external supply, with certain pressure bearing oil film is completely separated from the start, when the shaft neck reach enough speed, namely the use of hydrodynamic lubrication bearing.

(2) when the Raymond mill is shut down, let the pressure oil float the shaft neck slowly on the bearing bush, so as not to abrade the bearing bush. This ensures that the journal is started under the condition of pure liquid friction. The friction resistance is small, the power consumption is small, and the transmission efficiency is high.

What are the Performance Features of VSI Sand Making Machine?

VSI sand making machine is an indispensable machine of the sand making production line and is a practical and reliable sand making machine. VSI sand making machine is especially suitable for making building sand and for the fine crushing and medium crushing of many types of hard and crisp materials such as abrasive material, refractory, cement, silica sand, steel sand, slag powder, copper ore, iron ore, gold ore, concrete aggregate and pitch aggregate. It is a type of highly efficient and energy-saving stone crushing and sand making machine with world-level technology, and it can save 50% energy compared with traditional sand maker.

1. VSI sand maker is a new type of medium and fine crushing machine developed, and is a machine that can be widely used for replacing cone crusher, roll crusher and ball mill.

2. novel structure and stable operation.

3. low energy consumption, high output and big crushing ratio.

4. small size, simple operation and convenient installation and maintenance.

5. VSI sand making machine has the function of reshaping, and the final products are in the shape of cube and the stacking density is big.

6. In the production process, the stone materials can form a protective layer, so that the machine frame has no abrasion and is durable.

7. The few quick-wear spare parts of VSI sand machine are made of super-hard wear-resisting materials, so that the machine has small size and light weight and is convenient for spare parts changing.

8. The working noises of VSI sand crusher is lower than 75db and the powder dust pollution is little.

vertical roller mill by five unique advantages own customer's praise

Our company design and production of the new type vertical rolelr mill is widely used in the crushing, drying, grinding, grading conveying in one, the system is simple, compact layout, covers an area of approximately 50% and milling system, open layout, thus reducing the large investment costs. With its own five unique advantages, get the customer's praise.

First: long service life

Compared with other milling equipment compared to vertical roller mill using advanced milling technology, stable operation, the production process at the same time, the design in the angle of impact crushing cavity transformation, but also can reduce the friction material and wear resistant parts, so as to effectively prolong the service life of the equipment of vertical mill.

Second: good environmental protection

The internal vertical roller mill vortex chamber adopts the unique flow of air circulation device, thereby reducing the discharge volume, which can not only reduce the dust pollution, but also can improve the work efficiency of the milling machinery.

Third: easy maintenance

The traditional mill equipment is provided with an observation that only the back door, and vertical mill in the design of observation door, except in the side also opened the door to observe the repair, also adopts hydraulic drive cover device, which is more conducive to the maintenance and observation of the operation of equipment and so on.

Fourth: large amount of processing

After a deep cavity type rotor structure optimization, the throughput can be improved more than 40%, greatly enhances the vertical mill production capacity; in addition, we will also discharge through a special transformation, can adjust a wider range of particle size, to meet customer and market needs can be better, make it have stronger is the market adaptability.

Fifth: finished grain shape excellent

The finished grain type vertical roller mill grinding work after the excellent quality, strong, flakiness content less, small iron pollution, loved by the majority of users, high market sales. In addition, the equipment is affected by the moisture content of the material is very small, can be applied to more forms of ore material fine sand production operations.