The whole structure of Raymond mill is composed of main machine, analyzer, pipeline device, blower, and can be equipped with crusher, hoist, electromagnetic vibrating feeder, electric control motor, etc. according to user needs. Raymond mill is suitable for non-flammable and explosive mining and chemical industries such as barite, calcite, potash feldspar, talc, marble, limestone, ceramics, glass, etc. Mohs hardness is not greater than 7, and humidity is below 6%. , Building materials, metallurgy and other industries for powder processing of more than 280 materials, the particle size of the finished product can be adjusted arbitrarily within the range of 100-425 mesh.
The structural features of the Raymond mill
1. The fineness of the finished powder of Raymond mill is uniform, and the sieving rate is 99%, which is difficult for other milling equipment to have.
2. The electrical system of the Raymond mill adopts centralized control, and the milling workshop can basically realize unmanned operation and maintenance.
3. The important parts of the Raymond mill are made of good steel, and the wear parts are made of high-performance wear-resistant materials. The whole machine has high wear resistance and reliable operation.
4. The Raymond mill has a three-dimensional structure, a small area, and a strong complete set. From the block material to the finished powder, it forms an independent production system.
5. The transmission device of the Raymond pulverizer adopts a closed gear box and belt wheel, which is stable in transmission and reliable in operation.
Precautions for the use of Raymond mill
1. In order to make the Raymond mill normal, the "equipment maintenance and safe operation system" should be formulated to ensure the long-term safe operation of the Raymond mill. At the same time, necessary maintenance tools, grease and corresponding accessories should be provided.
2. When the grinding roller device of the Raymond mill is used for more than 500 hours to replace the grinding roller, the rolling bearings in the roller sleeve must be cleaned, and the damaged parts should be replaced in time. The refueling tool can be a manual refueling pump and a grease gun. .
3. When the Raymond mill is in use, there should be a fixed person responsible for the supervision, and the operator must have a certain technical level. Before the installation of the Raymond mill, the operators must carry out the necessary technical training to make them understand the principle and performance of the Raymond mill and be familiar with the operating procedures.
4. After the Raymond mill has been used for a period of time, it should be overhauled. At the same time, the wearing parts such as the grinding roller, ring blade, etc. should be overhauled and replaced. The connecting bolts and nuts of the grinding roller device should be carefully checked before and after use to see if There is a loose phenomenon, whether the lubricating grease has been added enough.
Click here to get grinding mills price: https://m.zenithcrusher.com/products/grinding-mill/
The structural features of the Raymond mill
1. The fineness of the finished powder of Raymond mill is uniform, and the sieving rate is 99%, which is difficult for other milling equipment to have.
2. The electrical system of the Raymond mill adopts centralized control, and the milling workshop can basically realize unmanned operation and maintenance.
3. The important parts of the Raymond mill are made of good steel, and the wear parts are made of high-performance wear-resistant materials. The whole machine has high wear resistance and reliable operation.
4. The Raymond mill has a three-dimensional structure, a small area, and a strong complete set. From the block material to the finished powder, it forms an independent production system.
5. The transmission device of the Raymond pulverizer adopts a closed gear box and belt wheel, which is stable in transmission and reliable in operation.
Precautions for the use of Raymond mill
1. In order to make the Raymond mill normal, the "equipment maintenance and safe operation system" should be formulated to ensure the long-term safe operation of the Raymond mill. At the same time, necessary maintenance tools, grease and corresponding accessories should be provided.
2. When the grinding roller device of the Raymond mill is used for more than 500 hours to replace the grinding roller, the rolling bearings in the roller sleeve must be cleaned, and the damaged parts should be replaced in time. The refueling tool can be a manual refueling pump and a grease gun. .
3. When the Raymond mill is in use, there should be a fixed person responsible for the supervision, and the operator must have a certain technical level. Before the installation of the Raymond mill, the operators must carry out the necessary technical training to make them understand the principle and performance of the Raymond mill and be familiar with the operating procedures.
4. After the Raymond mill has been used for a period of time, it should be overhauled. At the same time, the wearing parts such as the grinding roller, ring blade, etc. should be overhauled and replaced. The connecting bolts and nuts of the grinding roller device should be carefully checked before and after use to see if There is a loose phenomenon, whether the lubricating grease has been added enough.
Click here to get grinding mills price: https://m.zenithcrusher.com/products/grinding-mill/