Extrusion PTFE Rod,Dia - 4mm to 200mm

Extrusion PTFE Rod has a wide range of practicable temperature from -180C~+260C and a wax-like surface to which anything hardly sticks. Extrusion Teflon rod has the lowest coefficient of friction of all known solid materials. Extrusion Teflon bar has the best electrical properties of all plastic.

Use of the Extrusion PTFE bar The electrical insulation used under various kinds of frequency, the seal liner of various kinds of corrosivity medium, Antisticking materials, lubrication material.

Project Name	Unit	Result
Apparent Density	g/cm3	2.1 ~ 2.3
Tensile Strength	Mpa	≥ 14.0
Ultimate Elongation	%	≥ 150
Dia. ( mm )	4, 5, 6, 7, 8, 9, 10, 12, 15, 18, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75, 80 ...150.. .200
Length ( mm )	1000mm ; 2000mm

Extruded PTFE Rod Dia,5mm ~ 500mm

 

• Material: 100% recycled PTFE granular resin
• Style: Extruded PTFE Rod
• Diameter: 5mm ~ 120mm
• Length: 100mm ~ 3000mm. etc.
• Density: 2.1 ~ 2.3 g/cm3
• Temp: -180° C ~ + 260° C

 

Extruded PTFE Rod (100% recycled) is manufactured by techniques of paste extruding and RAM extruding method in the diameter from 5 to 110mm with PTFE granular resin. As PTFE(Teflon) has a very low co-efficient of friction, the surface of extruded PTFE rod has similar friction levels to ice. Extruded PTFE rod can work at -180° C ~+260° C and is the best electrical insulator of all known plastics.

Diameter(mm)		Length(mm)
Nominal	Tolerance	Nominal	Tolerance
5, 6	+0.480	100	+5.0
7, 8, 9	+0.580	100	+5.0
10, 13, 15, 16, 18	+1.100	100, 1000	+3.60
20, 25, 30	+1.130	100, 1000	+3.60
35, 40, 45, 50	+1.600	100, 1000	+3.60
55, 60, 65, 70, 75, 80, 85, 90, 100	+2.000	100, 1000	+2.50
110, 120, 150, 200	+2.500	100, 1000	+2.50

PTFE convoluted hose ID 40mm

PTFE Flexible Hose PTFE convoluted hose in high quality.

It can be replacement of the low strength graphite hose ceramic hose and glass hose Eliminate the high-frequency vibration.It can be the feeding and discharge hose of the tankers tanks containers and reactorsAlso connector of the dislocation pipeline or balance the displacement of the pipeline cause by weather changed or other reason1.Provide DN6-150mm length 20mm-20000mm.Customized are welcome2.Normal wall thickness:1mm-2.5mm thinnest wall can be 0.5mm3.The number of fatigue:>=100004.Enhance woven can be choosed5.Different connect way can be available Generally connected by the Flange Thread Quick connector or directly connect to the equipment fixed by the clamp or the wireWall Thickness Standard: 1.5mm-2.2mmFatigue Times1000Use: It can be used to connect low mechanical graphite porcelain and glass pipeline as supplying and discharging tube of tanker store tank container or reaction kettle. It can be used to connect dislocation pipe to balance pipeline displacement size change due to weather or other causes or to eliminate vibration of high frequency machinery. In some special occasions it can be used as tube reactor or heat exchanger.

Teflon Max ID 25 FT Convoluted PTFE Hose

PTFE Convoluted Hose, ranging from 1/8" inside diameter up to a 4" inside diameter. Normally supplied in natural PTFE, we can also provide this convoluted tubing in FEP, MFA, PFA, ETFE, PVDF, or PEEK™.
PTFE Convoluted Tubing is available in coils or with cuffs (straight ends on each side of the tubing) that can be sized on the inside or outside diameter. Flares and flanges for fittings are available upon request.
Note: Please allow 4-5 weeks standard delivery time for this product.

Features:

• Teflon® Tubing - Convoluted PTFE Features
• PTFE has the lowest coefficient of friction of any solid material allowing unrestricted flow.
• Teflon PTFE moisture retention is less than 0.01% over a 24 hour period.
• PTFE has an indefinite shelf life.
• PTFE has a low void content.

Teflon PTFE Virgin Sheet, 1/16" - .062" x 12" x 12" White

Teflon PTFE Virgin Sheet,  1/16" - .062" x 12" x 12" White,Thickness Tolerance ±0.005".

PTFE, also known under the brand name Teflon, is a soft fluoropolymer mechanical plastic with exceptional resistance to high temperatures, chemicals, corrosion and stress cracking.

PTFE features impressive heat, mechanical toughness, electrical and low friction properties, making it the material of choice for many high heat and low friction applications.

PTFE plastic is available in FDA approved, electrical, mechanical, glass-filled and bearing grades.