The molding process of the press automatic Moulding Machine

Is moulded plastic processing and molding the application in the city one of the oldest technology. It has a mature production technology, equipment and mold is simple, easy to forming large products, can use multiple modes to improve the production of small parts, etc, in machinery, electronics, transportation and daily life, and many other fields has been widely used.

 The market will often see a lot of kinds of Press Moulding Machine, for example: Polymer/PTFE Push press Automatic Moulding Machine, Polymer/PTFE Flange press Automatic Moulding Machine, Polymer/PTFE gasket automatic Moulding Machine, Semi-automatic Molding Machine and so on.

 Molding is widely used in the following fields:

Electrical: insulator, switch box, electrical equipment housing, insulation tools, wiring board, etc.

Automobile: lamp shade, front and rear bumper, battery bracket, engine soundproof board, etc.

Railway: window frame of vehicle, toilet components, seats, table tops, siding and roof of carriage, etc.

Construction: water tank, bath products, door panels, purification tank, building template, etc.

Bathroom: bathtub, integral bathroom equipment, integrated wash basin, etc.

And other areas of industry and agriculture.

 Molding technology is a method of putting quantitative molding materials (powder, granular or fibrous plastic) into the metal mold and forming products under the action of temperature and pressure. During the molding process, heat and pressure are required to melt (or plasticize) the molding material, fill the mold cavity with flow, and make the resin solidify. The principle is that the process of pressurizing, shaping and heating depends on the closure of the heated mold.

 Moulding Machine technology is the oldest molding method in plastic processing technology. Because of its long history, the molding technology has been quite mature, at present in thermosetting plastics and some thermoplastic plastics (fluoroplastics, uhmwpe, polyimide, etc.) processing is still the most widely used and the main position of the molding method. Moulded thermosetting plastic, placed in the cavity of the thermosetting plastic under the action of heat, first changed from solid to melt, melt flow under pressure with the shape of the cavity and cavity has given, as the crosslinking reaction, resin molecular weight increased, the curing degree rise, moulding material viscosity increase gradually and becomes solid, finally becomes demoulding products. Thermoplastic plastic mold pressure, in the previous stage of the situation and thermosetting Plastic the same, but because there is no cross-linking reaction, so in the flow of full cavity, the mold must be cooled to make its molten plastic into a solid with a constant strength can be demodulated into products. Because thermoplastic plastic mold pressing mold needs to alternately heating and cooling, production cycle is long, so thermoplastic products generally choose injection molding method more economic, only in the mold larger plane of Plastic products or because of the flow of thermoplastic plastic injection molding method is difficult to use molding.

 In the mold press material filled with the mold cavity flow process, not only the resin flow, the reinforcement material also to flow, so the mold press molding process molding pressure is higher than other process methods, belongs to the high pressure molding. Therefore, it needs not only the hydraulic press which can control the pressure, but also the high strength, high precision and high temperature resistant metal die.