We should check regularly if there is no looseness or wear

Conveyor belt conveyor motor is controlled by frequency converter to realize stepless speed change and achieve the purpose of economic operation of the system. After the motor is started, the inlet cylinder is retracted, and the empty bottle is fed from the conveyor belt and starts to enter the bottle.

The outlet cylinder then Syringe Printing Machine Manufacturers and the incoming empty bottle is blocked by the outlet stop. The photoelectric switch is set at the inlet to detect the number of bottles. When the number of bottles is the same as the number of filling heads, the inlet cylinder is extended, the inlet is blocked from being stopped, and the conveyor motor is stopped. At this point, the filling head drops to the mouth of the bottle and begins to fill. After the filling is completed, the filling head rises, the outlet cylinder retracts, the conveyor motor starts to rotate again, the filled bottle is sent out, and then the inlet cylinder is retracted, and the photoelectric switch starts to detect the number of bottles.

The lower punch does not leave the middle die hole during the working process, and no other processing is required. Pressing the tablet punch with a profiled die is not free to rotate, but moves up and down along the upper and lower rails. When the turntable is driven, the punch and the guide rail are slidingly rubbed, so that the punch and the guide rail wear each other. Therefore, when we use them, we must pay attention to lubrication. We must remember to do maintenance every day. We should check regularly if there is no looseness or wear. When it is affected, the ram and the middle die cannot run.

With the continuous development of the auto syringe printing machine industry, granulating equipment is widely used in many fields, such as food, medicine, feed and so on. This type of equipment has combined the two-step mixing and granulation process, which not only saves time but also improves efficiency. At the same time, mechanical mixing replaces manual operation, reduces cross-contamination, and ensures the quality and safety of the products produced, which is favored by the market.