SMT machines: also known as "mounter", "Surface Mount System" (Surface Mount System), in the production line, it is configured after the dispenser or a screen printing machine, by moving the mounting head of the Surface Mount Component a device placed on the PCB pads accurately. Divided into manual and automatic two kinds.
Automatic placement machine is used to achieve high speed, high precision automatic discharge device affixed components, the entire SMT production of the most critical and most complex equipment. Pick and place machine production line is the main equipment, SMT Machines from the early development of low-speed mechanical SMT placement machine high speed optical alignment, to the multi-functional, flexible connection modular development.
SMT Machines as a high-tech products, safe and correct operation of the machine and people are very important.
Safe operation of the mounter most basic is the operator should determine the most accurate, should follow the following basic safety rules:
1. The machine operator should receive training in the proper way to operate under.
2. Check the machine, repair and replacement of parts or internal adjustments should turn off the power (the machine maintenance must be in pressing the emergency button or power off situation.
3. To make sure "read coordinates" and to make adjustments when the machine YPU (programming block) in your hands to stop the action at any time.
4. make sure "interlock" safety device to stop the machine at any time in order to remain effective, safety testing on the machine and so can not be skipped, shorted, otherwise prone to personal or machine accidents.
Allowing only one operator operates a machine 5. production.
6. During operation, make sure all parts of the body such as hands and first-class machine outside the range of movement.
7. The machine must be properly grounded <real ground, rather than the zero line>.
8. Do not use the machine body in a gas or very dirty environments.