When transporting PVC pipes and fittings wholesale, try not to be scratched or hit violently. When storing PVC pipes and fittings, keep them away from heat sources, avoid deformation due to high temperature, and keep away from oil and chemical pollution. It is best to choose a flat and ventilated warehouse on the ground. If it is stored outdoors, it should be hidden by hiding it. Moreover, the pipes must be stacked in a horizontal and regular manner, and the height of the stack must be limited, so that the stack should not be too high.
Also, when loading and unloading PVC pipe fittings, you must be careful, the arrangement should be regular, instead of throwing or dragging along the ground, you must use non-metallic ropes for hoisting to avoid damage to the outer layer of the PVC pipe fittings. Connection: wipe the pipe sleeve and pipe sleeve clean before welding; then measure the depth of the socket and mark the position of the pipe port; then apply the adhesive, first paint the socket, and apply an even and appropriate amount; then align the direction and insert Scribe the part once, rotate 1/4 circle; wipe the glue residue at the socket; finally, the bridged pipe is left standing until the interface is solidified.
The safe use of adhesives: Adhesives and cleaning agents should be used after opening, and non-workers are not allowed to use them. There should be no open flame at the junction, and good ventilation should be maintained. -10° is not suitable for construction, the bonding point cannot be baked with fire, and the construction personnel must wear gloves. If the adhesive gets into the eyes, rinse immediately with plenty of water.
With the hot sales of bathroom shower doors, more and more owners choose to install their favorite bathroom shower doors to decorate their bathrooms. There are many shapes of bathroom shower doors on the market, mainly square, arc, diamond, etc. There are many styles, but choosing the one that suits you is the most important! Choosing it will make your bathroom look more advanced.
Today, I will introduce the appearance and characteristics of the most common square, arc and diamond bathroom shower doors, and what kind of bathroom suits you:
1. Square bathroom shower doors
Overall appearance: The rectangular bathroom shower doors have sharp edges and corners, which look steady and domineering. The shape is subdivided into rectangles and squares, and the internal space is spacious, larger than other shapes of bathroom shower doors.
Features:
①The square bathroom shower doors are all made of flat glass, which can be customized according to any size and requirements.
②Square bathroom shower doors can be opened with flat or sliding doors. Everyone should decide how to open the door according to the decoration of their bathroom.
Selection recommendation: If the bathroom space is large, it is recommended to choose a square shower room, so as not to restrict the body and fully enjoy the pleasure of showering.
2. Curved bathroom shower doors
Appearance: The arc-shaped shower room has soft and beautiful lines. There are fan-shaped, arc-shaped, knife-shaped and other types. The area can be large or small, suitable for toilets in different spaces.
Features: The arc-shaped bathroom shower doors are mainly opened by sliding doors, which can fully save space and have no effect on cabinets, toilets and other bathroom furniture.
Recommended choice: curved bathroom shower doors can make full use of the corners of the bathroom space, occupying only a small space, so small bathrooms are more suitable for curved bathroom shower doors!
3. Diamond-shaped bathroom shower doors
Overall appearance: The shape maintains tough edges and corners, just like the cut surface of a diamond. The overall look is high-end atmosphere and more fashionable.
Features:
①Made of tempered glass on three sides, the thickness of the glass is generally 8 cm and 10 cm.
②Diamond bathroom shower doors have more functions and higher prices. The basic structure is a chassis and fence, with abundant materials, strong texture and longer service life.
Selection recommendation: If the bathroom area is not large, but you want multi-functional bathroom shower doors, it is recommended to choose diamond-shaped bathroom shower doors!
Tempered glass is widely used with the needs of life, and its quality requirements are getting higher and higher. I believe everyone also knows that Ruben on the fifth anniversary of Guinness is the only player who failed and smashed 17 pieces in China. Netizens disputed the failure of its challenge. Is the quality of China's Tempered glass too good? Or is there a problem with the fixed method? Regardless of the result, the quality of Tempered glass is very important. Since the glass must be heated to the corresponding part of the temperature to be uniform, the difference should not be too large, so to control this data, three elements must be mastered.
1. Choose a reasonable heating time. The heating power of the tempering furnace is fixed, and the heating time is usually set at about 35-40 seconds per millimeter of glass. For example, the heating time for 6mm glass is about 6 seconds. This calculation method is suitable for ordinary flat Tempered glass with a thickness of less than 12mm. When the thickness of the glass is 12~19mm, the basic calculation method for heating time is about 40~45 seconds per 1mm of glass.
2. To achieve uniform heating, the arrangement of the glass on the placement table is also very important. The reasonable arrangement of the sheet placement is mainly to ensure the uniformity of the longitudinal and transverse loads in the electric furnace, that is, the placement of the glass sheets in each furnace must be uniform.
3. According to the load of the electric furnace, select a reasonable heating temperature and effectively control the temperature in the furnace. The heating of glass in the tempering furnace mainly includes conduction, radiation and convection. The electric furnace load mentioned here does not refer to the electric furnace, but refers to the relationship between the thickness of the glass, the heating temperature and the heating time.
Insulating tape is pvc electrical tape, because it has a rubber surface, it can be pasted with anything. However, the insulating self-adhesive tape can only stick to itself and will not stick to other objects. The general insulating self-adhesive tape will have a layer of plastic film. As long as this layer of film is removed, it can be with itself. It is pasted together and has a little flexibility. It is generally used for waterproofing, high temperature resistance (high current) or for wrapping around the cable.
pvc electrical tape refers to the tape used to prevent leakage and provide insulation when used by electricians. It has good insulation and pressure resistance, flame retardant, weather resistance and other characteristics, suitable for wire connection, electrical insulation protection and other characteristics.
pvc electrical tape is a kind of polyvinyl chloride insulating tape with excellent function, economical and practical. It has excellent wear resistance, moisture resistance, acid and alkali resistance, and resistance to environmental changes (including ultraviolet rays). It has high dielectric strength, good formability, and good mechanical maintenance can be obtained with less dosage.
When in use, it is coiled in a semi-stacked way. In order to make the wrapping uniform and regular, it is necessary to apply a tensile force. In the parallel connection, the tape needs to be wrapped around the end of the wire, and then folded back to leave a rubber pad to prevent gouging. When wrapping the final layer, it cannot be stretched to prevent the flag from being pulled.
At present, there are many brands of pvc electrical tapes in the domestic market, but their quality varies. pvc electrical tapes have high requirements on the functions and safety of the tapes. Some defective pvc electrical tapes often bring severe results.
pvc electrical tape has excellent insulation functions such as weather resistance, abrasion resistance, acid and alkali resistance, aging resistance, flame retardancy, wrapping and conformability. It is widely used in all walks of life and is suitable for wire coiling, insulation protection, color marking, etc.
With the gradual popularity of modern architectural styles, modern decoration styles have also become a popular choice for people when decorating houses. It seems that choosing some modern lighting with simple style has become a fashion. Among them, outdoor lights seem to be favored by many consumers.
Modern outdoor lights are generally energy-saving. Energy-saving energy without pollution is environmental protection. DC drive, ultra-low power consumption (0.03-0.06 watts per tube) electro-optical power conversion is close to 100%, the same lighting effect is more than 80% energy-saving than traditional light sources. With long life span, some people call the wall light source a longevity lamp, which means a lamp that never goes out. Solid cold light source, epoxy resin encapsulation, there is no loose part in the lamp body, there are no shortcomings of filament light, easy to burn, thermal deposition, light decay, etc., and the service life can reach 60,000 to 100,000 hours, which is 10 times longer than that of traditional light sources. the above. It has better environmental protection benefits. There is no ultraviolet and infrared in the spectrum, no heat, no radiation, low glare, and waste can be recycled, no pollution, no mercury, cold light source, safe to touch, and it is a typical green lighting source.
Mirrea’s modern outdoor lights use a patented waterproof design with a cap-shaped upper cover and a plug-shaped lower cover. The outside of the bulb is wrapped with an aluminum cylinder to prevent rust and corrosion. The easy-to-install two-piece rotatable mounting bracket and fixing nut are on the front side of the wall panel and the metallic black color tone gives a more concise but connotative feeling.