Based on the introduction of foreign technology, the new type of sand making machine is further improved by absorbing the advantages of the vertical impact crusher. At the same time, the advantages of hammer breaking and counterattack breaking are comprehensively developed. The equipment can be widely used in construction, mining, metallurgy, highway and other industries. How to prevent the sand making machine from appearing in the sand making production line What about the trouble?
Abnormal vibration of sand making machine occurred in the production process
1. If the material entering the sand making machine is too large, you can check the particle size of the feed;
2. The abrasion of impeller of sand making machine is uneven. Check the wear of impeller and hammer head. If there is wear, stop the machine in time for repair;
3. The impeller is not balanced and should be replaced timely if necessary;
4. If the foundation of sand making machine is not properly treated, check the anchor bolts and tighten them.
Bearing heating of sand making machine
1. If the bearing of sand making machine is short of oil, check and add oil in time. If the oil is too much, the bearing will be heated. The oil level must be checked when adding oil;
2. Sand machine bearing damage, inspection and timely replacement of bearings;
3. If the upper cover of bearing body of sand making machine is too tight, the bolts should be adjusted properly and the tightness should be moderate.
Too large discharge particle of sand making machine
1. Check the abrasion of sand making machine hammer head, and repair and replace the worn hammer head in time;
2. Check the abrasion of the side impact plate of the sand making machine and replace it if necessary;
3. Check the feeding particle size of sand making machine. If the feed particle size is too large, it will also affect the discharge particle size.
Belt overturning of sand making machine
1. The belt of sand making machine is worn and needs to be replaced;
2. Belt conveyor assembly problem, need to adjust the pulley in the same plane;
3. Check the quality of the V-belt itself.
These are for the sand machine in the sand production line failure, but for the sand making machine manufacturers, will largely ensure the quality of products, in the equipment technology aspects of continuous innovation, to ensure the interests of customers.
Abnormal vibration of sand making machine occurred in the production process
1. If the material entering the sand making machine is too large, you can check the particle size of the feed;
2. The abrasion of impeller of sand making machine is uneven. Check the wear of impeller and hammer head. If there is wear, stop the machine in time for repair;
3. The impeller is not balanced and should be replaced timely if necessary;
4. If the foundation of sand making machine is not properly treated, check the anchor bolts and tighten them.
Bearing heating of sand making machine
1. If the bearing of sand making machine is short of oil, check and add oil in time. If the oil is too much, the bearing will be heated. The oil level must be checked when adding oil;
2. Sand machine bearing damage, inspection and timely replacement of bearings;
3. If the upper cover of bearing body of sand making machine is too tight, the bolts should be adjusted properly and the tightness should be moderate.
Too large discharge particle of sand making machine
1. Check the abrasion of sand making machine hammer head, and repair and replace the worn hammer head in time;
2. Check the abrasion of the side impact plate of the sand making machine and replace it if necessary;
3. Check the feeding particle size of sand making machine. If the feed particle size is too large, it will also affect the discharge particle size.
Belt overturning of sand making machine
1. The belt of sand making machine is worn and needs to be replaced;
2. Belt conveyor assembly problem, need to adjust the pulley in the same plane;
3. Check the quality of the V-belt itself.
These are for the sand machine in the sand production line failure, but for the sand making machine manufacturers, will largely ensure the quality of products, in the equipment technology aspects of continuous innovation, to ensure the interests of customers.