Environmentally friendly qt12-15 cement brick making machine in stock, you deserve it.
In order to maintain the limited land capital and leave a clear blue sky for future generations, many countries and local governments have issued a number of policies to severely stop the continued use of traditional wall materials, red clay bricks.
Each building was built by stacking blocks of non-fired bricks. The fading of clay bricks triggered an innovation, a hollow brick and non-fired brick innovation, an opportunity and challenge innovation, and a wealth innovation.
In addition, many countries have abundant industrial waste residue capital such as fly ash.
Therefore, the establishment of a hydraulic brick machine factory is not only a bright investment that conforms to the policy guidance, but also a wise move for the benefit of the country and the people, and enjoys various government promotion policies and tax exemptions. do you want to know automatic brick making machine price?
The hydraulic brick machine uses advanced electronic control technology and unique forced feeding device, especially for the production of fly ash products, which can ensure that each piece of product in the mold box is fed quickly, full and dense, ensuring high density, high strength and production of the product. high efficiency. There are few supporting equipment related to the pad machine equipment, which is the auxiliary equipment, and the supporting equipment is also configured by itself. Therefore, you do not need to configure it during production, which allows you to use the cement pad machine mechanical cement pad machine equipment to produce road cement pads without worrying about the problem of additional manpower to operate the auxiliary equipment, thereby reducing bricks. The demand for machine equipment for manpower.
Hydraulic machinery has carried out many tests and technical innovations under the technical guidance of professional personnel according to the needs of the market, which has greatly improved production efficiency and reduced costs. The produced block products have the advantages of high strength and regular shape.
The indicator light on the solenoid directional valve of the high quality qt12-15 cement brick making machine door is on, the pressure gauge shows the pressure, but there is no oil pressure on the oil pipe. Cause of failure: the solenoid directional valve is blocked, resulting in no oil pressure or very low oil pressure on the oil pipe in the oil cylinder of the material door. Removal method: cleaning liquid solenoid directional valve or replacement of valve parts. Fault reason: solenoid valve coil burned out, cement brick mechanical and electrical magnetic valve can not reverse. Removal method: replace the solenoid valve coil. Observe whether the solenoid valve spool is attached? Unplug the solenoid valve coil plug, press the brick machine material door open or material door close when the toggle switch, and then use a screwdriver to top the material door solenoid reversing valve valve core, the material door can move, can confirm the solenoid valve solenoid coil damage (or use a multimeter to test the coil resistance, further judgment). Material door output terminal lamp does not light brick machine did not output voltage cement brick machine factory | cement hollow bricks machine price Phenomenon: the indicator light of the input terminal of PLC can be on, the indicator light of the output terminal is not on, the brick machine has no output voltage. Cause of failure: improper setting of parameters, material door opening time is set to zero, or material door opening times is zero. If this is the reason, no burning brick machine PLC output point will flash. Elimination method: cement brick machine will be material door opening time set to 1.0 seconds, or material door opening times for 1-2 times. Cause of failure: PLC output terminal is damaged. Elimination method: if the PLC output terminal is damaged, remove the maintenance or replace the PLC can be.
