Extrusion PTFE Rod,Dia - 4mm to 200mm

Extrusion PTFE Rod has a wide range of practicable temperature from -180C~+260C and a wax-like surface to which anything hardly sticks. Extrusion Teflon rod has the lowest coefficient of friction of all known solid materials. Extrusion Teflon bar has the best electrical properties of all plastic.

Use of the Extrusion PTFE bar The electrical insulation used under various kinds of frequency, the seal liner of various kinds of corrosivity medium, Antisticking materials, lubrication material.

Project Name	Unit	Result
Apparent Density	g/cm3	2.1 ~ 2.3
Tensile Strength	Mpa	≥ 14.0
Ultimate Elongation	%	≥ 150
Dia. ( mm )	4, 5, 6, 7, 8, 9, 10, 12, 15, 18, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65, 70, 75, 80 ...150.. .200
Length ( mm )	1000mm ; 2000mm

Extruded PTFE Rod Dia,5mm ~ 500mm

 

• Material: 100% recycled PTFE granular resin
• Style: Extruded PTFE Rod
• Diameter: 5mm ~ 120mm
• Length: 100mm ~ 3000mm. etc.
• Density: 2.1 ~ 2.3 g/cm3
• Temp: -180° C ~ + 260° C

 

Extruded PTFE Rod (100% recycled) is manufactured by techniques of paste extruding and RAM extruding method in the diameter from 5 to 110mm with PTFE granular resin. As PTFE(Teflon) has a very low co-efficient of friction, the surface of extruded PTFE rod has similar friction levels to ice. Extruded PTFE rod can work at -180° C ~+260° C and is the best electrical insulator of all known plastics.

Diameter(mm)		Length(mm)
Nominal	Tolerance	Nominal	Tolerance
5, 6	+0.480	100	+5.0
7, 8, 9	+0.580	100	+5.0
10, 13, 15, 16, 18	+1.100	100, 1000	+3.60
20, 25, 30	+1.130	100, 1000	+3.60
35, 40, 45, 50	+1.600	100, 1000	+3.60
55, 60, 65, 70, 75, 80, 85, 90, 100	+2.000	100, 1000	+2.50
110, 120, 150, 200	+2.500	100, 1000	+2.50