Launch X431 iDiag Auto Diag Scanner for IOS has many functions. It can do the vehicle full system diagnosis, and read DTCs and clear DTCs. Instant information and software upgrade reminding. Launch X431 iDiag Auto Diag Scanner can maintenance community to share technical experience and data base contains maintenance data and maintenance case online shareing. It supplys strong data base support and online service and so on.
Cable ( wired connection) Connection Procedure of obd2 scanner X431 Diagun III:
1. Insert the TF card into the slot.
2. Connect one end of the X-431 Diagun III main unit diagnostic cable to the USB port of X-431 Diagun III main unit.
3. Link the other end of X431 Diagun III main unit diagnostic cable with the Micro USB port of the DBScar diagnostic connector.
4. Find out the vehicle’s DLC.
5. Connect the other end of DBScar diagnostic connector to the vehicle’s DLC and the power indicators of X-431 Diagun III and DBScar connector will light up.
Bluetooth (wireless) Connection Procedure of Launch X431 Diagun III:
1. Insert the TF card into the slot.
2. Find out the vehicle’s DLC.
3. Plug the 16 PIN end of DBScar diagnostic connector into the vehicle’s DLC.
Note: If battery power of X-431 Diagun III main unit is running low, use the charger to recharge it: Insert one end (20PIN Male) of the charger into the USB port of Launch X431 Diagun main unit and plug the other end in AC 100-240V power socket.
Cable ( wired connection) Connection Procedure of obd2 scanner X431 Diagun III:
1. Insert the TF card into the slot.
2. Connect one end of the X-431 Diagun III main unit diagnostic cable to the USB port of X-431 Diagun III main unit.
3. Link the other end of X431 Diagun III main unit diagnostic cable with the Micro USB port of the DBScar diagnostic connector.
4. Find out the vehicle’s DLC.
5. Connect the other end of DBScar diagnostic connector to the vehicle’s DLC and the power indicators of X-431 Diagun III and DBScar connector will light up.
Bluetooth (wireless) Connection Procedure of Launch X431 Diagun III:
1. Insert the TF card into the slot.
2. Find out the vehicle’s DLC.
3. Plug the 16 PIN end of DBScar diagnostic connector into the vehicle’s DLC.
Note: If battery power of X-431 Diagun III main unit is running low, use the charger to recharge it: Insert one end (20PIN Male) of the charger into the USB port of Launch X431 Diagun main unit and plug the other end in AC 100-240V power socket.