VOLVO VOCOM II 88894000 V2.7 2019

VOCOM I INTERFACE
Improved LED indicators
Improved quality of cables
Military standard on connectors
Better liquid and dust ingress protectors
Metal casing and rubber bumpers for better protection
Operates from -40 Celsius to +85 Celsius
Shock resistance: 2 meters

MOST POWERFULL SOLUTION IN THE MARKET

tech tool full software
Newest and most fullest diagnostic software

Electrical Wiring Diagrams – FM, FH, FL, FE

Developement access – configure more than 11000 parameters of ANY level without any restrictions (APCI)
For example:
Minimum/maximum values like speed limit
Chasis ID Change
Injector programming
EURO 6 configurations available
Clutch calibration
And many more

Spare parts catalogs – for construction, trucks, marine. Matris, Impact, Prosis.

Supported languages: English, Czech, Danish, German, Spanish, French, Italian, Magyar, Dutch, Polish, Portuguese, Romanian, Swedish, Turkish, Russian, Lithuanian and other.

TRUCK COVERAGE
Volvo Trucks – Older electrical system, Vehicle electrical system ’98; VERSION2, VERSION3; VERSION4 – FH4/FM4;
Volvo Buses – Conventional, Multiplexed, Multiplexed v2, Multiplexed v3;
Volvo Construction Equipment;
Volvo Penta, Marine engines – VERSION2, VERSION3;
Volvo OEM Component Customer – VERSION2, VERSION3;
Mack Trucks – V-MAC I/II/III, ITC, IV, IV+;
Renault Trucks – VERSION2, VERSION3, VERSION4; (EURO 6, DXI, DTI)
UD Trucks – VERSION2, VERSION3.
PACKAGE CONTAINS
Volvo 88894000 Vocom II truck diagnostic tool
Volvo 88890304 OBD2 cable
Volvo 88890306 8-pin cable
Volvo 88890305 USB cable
Included refurbished business class laptop prepared to use with diagnostic tool

How to use Xtool X100 Pad2 to program 2008 Ram 1500

This post comes with the guide to add a new key to 2008 Ram 1500 by Xtool X100 Pad2.

All need:

One original key+ one spare key

Xtool X100 PAD2 key programmer standard version

Procedure:

Step 1: Follow the connection method to connect X100 PAD2 to vehicle

Step 2: Insert the original key into ignition

Step 3: Select Immobilizer-> select the corresponding car brand and car model-> Get security code

Step 4: Follow the prompts on the x100 pad2 screen to turn on/ off ignition until read out pin code successfully

Step 5: Remove the transponder from the original key

Put it together with the new key, and insert into vehicle

Just held this one took the innards out of it, so the transponder would be a way to program the new one and success

Get XTOOL X100 PAD2 Key Programmer Standard Version from UK with best price:

Xtool x100 pad2 FAQS and the solutions for software cant working

Xtool x100 pad2 FAQS and the solutions for software cant working

01 pad2

Xtool X100 PAD2 is the first tablet key programmer in the world! It not only provides customers with professional key programming,but also the most needed special functions for workshop. So someone will have questions for this new released product , lets check the part of questions with answer as bellow :



Q: Will this X100 pad 2 support Indian cars ?

A: No, it doesn’t support Indian cars.

Q:How about 4th 5th IMMO? we also need this function .

A:Yes, this Pad 2 support VW 4th/5th IMMO.

Q:Will x100 pad 2 support 4-System diagnosis?

A:Yes, x100 pad 2 can support 4-System diagnosis.

Q:How can I know the dealer code for this XTOOL X-100 PAD2?

A:Please try dealer code: XT0240



Based on Android system, X100 Pad 2 support easy updating via WIFI, which means you can download the software directly from official website. But when the software have problem , how to do next ? Please check as bellow :

1.Please uninstall the APP from the pad2 first

2.Delete the Xtool file from installation manual

3.Use the application package to install the APP again and check whether it works or not

Any other questions , please dont hesitate to contact us directly any time .

How to Change John Deere Speed Limit with PLD File Editor

John Deere PayLoad (PLD) File Editor – this is Developer level tool, that allows you to change factory parameters in the PLD files using John Deere Service Advisor.

Example: How to change speed limit with pld files?

Q1:Question about payload files:

I have pld files of my tractor (6330P) 11 in total.
I see in bottom of each files info about my tractor (option, serial number etc)
Question: My goal is up the speed limit from 40km to 50 km. I think I have to change OPTION=3 to OPTION=5, but do I have to edit each 11 pld file?
A1:You were right about the speed limit:
you can change OPTION=3 to OPTION=4 or any other you need.
Speed_30kmh = 1;
Speed_35kmh = 2;
Speed_40kmh = 3;
Speed_50kmh = 4;
Speed_ECO = 5;
Speed_NoiseRed_OOS = 6;

For R models the line is different. ROADSPEEDLIMIT=3 change to ROADSPEEDLIMIT=5 or any other you need.

var RoadSpeedLimit_30 = “1”;
var RoadSpeedLimit_35 = “2”;
var RoadSpeedLimit_3840 = “3”;
var RoadSpeedLimit_40E = “4”;
var RoadSpeedLimit_50 = “5”;
var RoadSpeedLimit_50E = “6”;
var RoadSpeedLimit_55 = “7”;
var RoadSpeedLimit_60 = “8”;
var RoadSpeedLimit_60E = “9”;

After you change it, sometimes you still need to lift the speed manually through the display (depending on the tractor model)

You only need to reprogram transmission controller for that.
If you reprogrammed all of them, some settings might have went to default so you might get up to 5 fault codes that you need to configure with SA.

Q2:Does it work with SA 4.2?
A2:Service Advisor is just a tool to use pld. Pld editor works without SA.

Q3:I have a question about trying to up the power of a 6330 to a 6430. If I compare the engine pld of both tractor they are identical (just the info in the bottom is different) So I don’t know how it could up the power if all the code is the same??
A3:most pld files are made for various models, the info at the bottom determines which part of the pld file will be used for programming. For example:
PRODUCT_MODEL_NO=6115
PERFORMANCE_OPTION_PART_NO=R546973
FACTORY_OPTIONS=RE570443

Q4: Do you have John Deere PLD file editor for sale?
A4: Sorry, we don’t have PLD files. You can search or download from google.

Porsche piwis tester 2 with Panasonic CF-30 laptop bluescreen

Porsche piwis tester 2 is dealer level diagnostic tool for Porsche vehicles before 2017. Covers functions including: Read/clear error code, catch data stream, computer programming match, component test, maintenance information consult, components site drawing, wiring diagram, equipped with the Panasonic CF-30 laptop and latest porsche software, piwis 2 can help you diagnose and program the most new and old kind of Porsche cars.

Porsche piwis2 with Panasonic CF-53 laptop

Porsche Piwis Tester 2 Overviwe

1. Software Version: 18.10 (Win7)

(If you need WinXP system with V18.150.500, kindly leave notes, we will use WinXP for you)

2. Support Languages: Russian, English, French, Spanish, Italian, German, Portuguese, Japanese, Chinese, Dutch

3. Update Method: By HDD (One Year for Free, It can not be updated online. 150USD for one time update after one year.) Software contains operating system win XP only. you just need to insert into your computer and use it.

4. Requires Online Modules: (F BCM R BCM DME ELV SRS KEY)

5. Bluetooth,GPS and Navigation Function are available. But you need to pay for the authorization of them.
How to Solve Porsche Piwis Tester 2 Blue Screen Defect?

Client replied that Porsche piwis tester 2 with Panasonic CF-30 laptop shows bluescreen when starting laptop, see below picture:


1.pls check laptop hard disk model, WIN7 system—>AHCI, XP syetem—>ATA or IDE

2.if hard disk model is correct, pls shoutdown laptop and unplug the memory memory bank and then plug it again.

3. Done, if still not work, contact sales for further solution.