How to Set Up Wifi Porsche Piwis 2 Configuration

Wifi Porsche Piwis 2 Samtec Hardware from Autonumen.com support wireless function, Piwis2 Samtec hardware support connect with Panasonic CF-30 via wifi. How to set up the Piwis 2 Samtec wifi Piwis 2 configuration for wireless connection? Below Autonumen.com share WIFI piwis2 Samtec hardware wifi connection setting guide.

Autonumen.com Porsche Piwis 2 Samtec Piwis2 WIFI Wireless Setting Guide:

1. Rounter configuration: the router id and password can set up by customer self.

2. Connect to Piwis 2 with Laptop via USB cable, connect to power adapter as well

3. Check Setting as following show


4. Enter the VCI configuration.



5. Enter the Porsche Piwis 2 WIFI account into SSID blank, and password into WEP blank, then save setting.



6. Restart the Setting – Network Setting



7. Choose WLAN, then check Search, then will search wifi information automatically



8. Enter the WIFI password as following, then choose Save.



9. Wifi configuration all ok, it will display the Wifi



Wifi Piwis2 Samtec hardware with V18.150.500 Piwis2 software wifi setup guide as above. Any customer need purchase Piwis2 Samtec hardware or WIFI Piwis2 just let us know freely.

Alldata10.53 crack+Mitchell Ondemand 5

ALLDATA 10.53 Full Set Q3 2013 Automotive Repair Data +Mitchell Ondemand 5.8.2 10/2013 Version is available in autonumen.com.
ALLDATA 10.53 auto repair software, the leading computer-based diagnostic, repair and estimating information system, can help you boost shop performance and build customer loyalty as you efficiently repair more makes and reduce comebacks.

Software version: alldata 10.53 crack version & OnDemand5 v5.8.2.35
Software capacity: 750GB

Operating system: all the software runs on Windows xp. Win7 and Win8. But some software only works on (32-bit system. It can not run on 64-bit system. Please work better on the 32-bit system.

ALLDATA Function:

Professional repair shops need current, factory-correct information to meet the complex repair demands of today’s automotive industry.
ALLDATA 10.53 shops have fast access to the industry’s best information for vehicles from 1982 to present including TSBs, maintenance schedules, manufacturer recall information, OE solutions, and factory images and diagrams.
The most comprehensive information for 1982 to present vehicles.
OEM images, diagrams and diagnostic flow charts
Parts and labor information Maintenance schedules
Manufacturer TSBs and Recalls
Integrated estimating software
OEM wiring diagrams with connector, ground, power distribution and splice information
A2Z Component Search – the fastest route available to component information

Whether you measure productivity by the number of vehicles repaired in a day, the variety of vehicles you’re able to work on, or the time spent on diagnosis and repair, using the right information and shop management tools is vital to the success of your business. ALLDATA can help you succeed in every way.
Automotive repair shops that use the ALLDATA system have a clear differentiation from other repair facilities. ALLDATA-equipped shops can provide their customers with the most accurate repair estimates and proof of diagnostic and repair procedures.

ALLDATA also includes factory-correct maintenance schedules that itemize additionally needed services. Moreover,ALLDATAhelps shops build consumer confidence and loyalty.

How to Check Porsche Engine Oil Level by PIWIS Tester

Checking the Porsche engine oil level makes more accurate than the normal procedure with the instrument cluster screen and on top of that, it tells you how much oil you have to top to be at max level. This will be used every time we change our oil.

Here is the procedure:
WM 170101 CHECKING ENGINE-OIL LEVEL USING THE PIWIS TESTER (CAYENNE, CAYENNE GTS, CAYENNE S HYBRID, CAYENNE S E, CAYENNE TURBO, CAYENNE
(3.0)) > CHECKING ENGINE-OIL LEVEL

Information
The Piwis Tester II instructions take precedence and in the event of a discrepancy these are the instructions that must be followed. Deviations may occur with later software versions.
1. PIWIS Tester II must be connected and ignition switched on.
2. Start the diagnostic program and select the required vehicle.
3. Select the DME control unit in the control unit overview. Press [F12] to continue.
4. Select the Maintenance/repairs menu. Press [F12] to continue.
5. Select the Oil filling function. Press [F12] to continue.
6. Start the engine and let it run until an engine oil temperature of 90° C is reached.Rev the engine if necessary to heat the engine oil to the specified temperature.
7.The oil level measurement process starts automatically as soon as the engine oil temperature
of 90° C is reached.
8. Switch off engine.
9. Add the quantity of oil displayed on the PIWIS Tester 2.
10. Disconnect the PIWIS Tester.

With the Launch X431 V+ it is located in the “Oil filling” special function menu of the DME and here is how it works:
Test on going:


Result (0.9 liter to add):

How to Set Up Piwis 2 WIFI Configuration

Wifi Piwis 2 is Samtec hardware support wireless connection for Porsche Piwis tester 2 diagnosis function. The client needs Porsche Piwis tester 2 Scanner wifi configuration after-sales service usual. Below Autonumen.com share how to set up Wifi Piwis Tester 2.

for Porsche diagnostic & programming, but I don’t know how to set up the wireless configuration. Some client bought wifi Piwis tester 2 for Porsche diagnosis, need help for wifi set up.

Wifi Porsche Piwis 2 Wireless Configuration Guide:

First of all, need check the Rounter configuration, get the router id and password can set up by customer self.

Secondly, connect Piwis 2 to Laptop via USB cable, connect power adapter as well

Then, Check Setting as following show


The fourth step: click & enter the “VCI configuration”

And then, enter the Porsche Piwis 2 WIFI


account into SSID blank, and password into WEP blank, then save the setting.

Furthermore, back to Restart the Setting – Network Setting Porsche


Then, choose WLAN, then check
Search, then will search wifi information automatically


enter the WIFI password as following, then choose Save.


Finally, Wifi configuration all ok, it will display the Wifi

The Development Mode Porsche PIWIS Tester II V16.2

Porsche PIWIS Tester II diagnostic system and original VXDiag Multi Tool for Porsche both are compatible with three modes but only two modes can be available– E (Development) mode with German, V (Aftersales) mode with multi-language. Here, Autonumen.com offers details of PIWIS Tester 2V16.2 Developer Mode, also called Engineer Mode.

Note:
Developer mode is a special Piwis software that allow a lot of advanced coding normally reserved only to Factory. With this function you will have a tool that can do more than software of official Porsche Dealer. For example, you can reprogram all ECUs completely offline.

Engineer Mode software is able to work with offline programming for almost all modules, also you can access special functions with it.

What can Porsche PIWIS Developer Mode do?
start/stop”LAST MODE”wait for stopping the engine and change memory
spoiler”lessen time when the car starts
spoiler”fixed”
spoiler”change angle”
Change VO code
Close Air Mercury
Upgrade power
Remove the tire pressure sensor
Install reversing camera
Install USB/BT
Close the seat belt warning
Change CDR/PCM operation interface
Air condition memorization
Start CDR_AUX
Open the PCM function
Manually set codes
Automatically set codes
Manually do programming
Automatically do programming