BMW ICOM A2 Diagnostic & Programming For BMW ICOM A2+B+C 2016.07 Engineers Version

BMW ICOM A2+B+C is upgrade of BMW ICOM, ICOM A2 is Second generation of BMW ISTA Diagnose and programming system. Support both new and old BMW vehicles.

BMW ICOM A2:
Software Version : 2016.07
ISTA/D (ISID /DiagnosticISTA-D 3.55.31 ISTA-P 3.59.0.600
VIN: 2016.06.15

BMW ICOM :
1. Support Multi-language: American English, British English, German, Spanish, French, Italian, Polish, Portuguese, Turkish, Czech, Swedish, Dutch, Indian, Greek, Russian, Japanese, Korean, Thai, Simplified Chinese and Traditional Chinese

2. Hardware Version: ICOM Application-01.40.05
3. Support Vehicles: BMW Cars, BMW Motorcycle, Rolls-Royce, Mini Cooper
4. Support BMW All Series Diagnose and Programming

bmw icom scanner BMW ICOM A2+B+C Function:

* Interface A2 – OBD diagnostic supporting MOST, D-CAN and K-CAN protocols.
* Interface B – diagnostic via MOST bus, and have connection to A-interface via USB connection.
* Interface C – 20-pin cable for old models.

BMW ICOM A2+B+C Special Features Compared with ICOM :
* The modified ICOM A2 for vehicles with OBD access receives a significantly more powerful processor and more storage capacity.Robust aluminium case will help to avoid damage when using in harsh environments.
* To protect the MOST connector, the ICOM B for vehicles with optical MOST access will be equipped with a soft cover made of rubber instead of the former plastic cap.
* The ICOM C for old series with a diagnostics socket will be additionally equipped with an approx. 20 cm long cable, which facilitates the connection of the ICOM A2 and makes storage in the engine compartment easier.

FAQ of ICOM A2:

Q1: Is there any diagnostic equipment can do BMW530 DA 2003 ? It is better in French
A1: Try to use the BMW ICOM A2

Q2: Does the BMW ICOM A2 have the installation manual?
A2: Inset the hard disk into the computer and input password BMW, you’ll find the installation manual.

Q3: BMW ICOM A2 (SP168-B) can do the BMW old car before 2000?
A3: You can do the old BMW car, if the car can not be done, then try for a few more cars

Q4: 2013 New BMW ICOM A2 + B + C Diagnostic & Programming Tool (SP168-B) can be programmed to control template EGS?
A4: Yes The entire vehicle control unit can be programmed

FAQ John Deere PayLoad (PLD) File Editor

John Deere PayLoad (PLD) File Editor – this is Developer level tool, that allows you to change factory parameters in the PLD files using John Deere Service Advisor.

With John Deere PLD File Encryptor/Decryptor you can:
-Decrypt PayLoad (PLD) file to txt/ini format
-Modify PLD file expiration
-Modify PLD factory options such as speed limit (for example change 40 km/h to 50 km/h)
-Adjust PLD file to different product serial
-Encrypt PLD file
-Program controller with modified PLD using Service Advisor
-Support Windows XP
Example: How to change speed limit with pld files?
Q1:
Question about payload files:
I have pld files of my tractor (6330P) 11 in total.
I see in bottom of each files info about my tractor (option, serial number etc)
Question: My goal is up the speed limit from 40km to 50 km. I think I have to change OPTION=3 to OPTION=5, but do I have to edit each 11 pld file?
A1:
You were right about the speed limit:
you can change OPTION=3 to OPTION=4 or any other you need.
Speed_30kmh = 1;
Speed_35kmh = 2;
Speed_40kmh = 3;
Speed_50kmh = 4;
Speed_ECO = 5;
Speed_NoiseRed_OOS = 6;
For R models the line is different. ROADSPEEDLIMIT=3 change to ROADSPEEDLIMIT=5 or any other you need.
var RoadSpeedLimit_30 = “1”;
var RoadSpeedLimit_35 = “2”;
var RoadSpeedLimit_3840 = “3”;
var RoadSpeedLimit_40E = “4”;
var RoadSpeedLimit_50 = “5”;
var RoadSpeedLimit_50E = “6”;
var RoadSpeedLimit_55 = “7”;
var RoadSpeedLimit_60 = “8”;
var RoadSpeedLimit_60E = “9”;
After you change it, sometimes you still need to lift the speed manually through the display (depending on the tractor model)
You only need to reprogram transmission controller for that.
If you reprogrammed all of them, some settings might have went to default so you might get up to 5 fault codes that you need to configure with SA.
Q2:
Does it work with SA 4.2?
A2:
Service Advisor is just a tool to use pld. Pld editor works without SA.
Q3:
I have a question about trying to up the power of a 6330 to a 6430. If I compare the engine pld of both tractor they are identical (just the info in the bottom is different) So I don’t know how it could up the power if all the code is the same??
A3:
most pld files are made for various models, the info at the bottom determines which part of the pld file will be used for programming. For example:
PRODUCT_MODEL_NO=6115
PERFORMANCE_OPTION_PART_NO=R546973
FACTORY_OPTIONS=RE570443
Q4: Do you have John Deere PLD file editor for sale?
A4: Sorry, we don’t have PLD files. You can search or download from google.
Related products related to John Deere PLD File Encyptor / Decryptor:
John Deere EDL V2 Data Link
John Deere Service Advisor SA 4.2