Ways to Clear up the challenge with MS908P

I share a problem about Autel Maxisys Pro important erasure on 2000 ford aim and its solution along with you.
Problem description:

I meant to exchange the PCM in my auto. With adopted each of the instruction for key erasure, the MaxiSYS MS908P seemed to
freeze at the nine next make to the endeavor bar.

Motives:
The engine informed me which i could only system new third crucial with obtaining 2 currently programmed keys, which meant that i couldn
’t program new essential if I did not have 2 performing keys.

Remedy:
1 Down load the beta version V6.twelve.10 to possess a examination.

two Try and system vital manually. The procedure bar will appear for 10s immediately after key erasure. Be sure to ignition off and plan it as
followed:

Convert the ignition important to posture 0

Cycle key1 from the ignition from OFF to Operate for at least 3 seconds

Cycle key2 from the ignition from OFF to Run for at least three seconds.
Cycle key1 from the ignition from OFF to Operate for a minimum of 3 seconds.
Two keys are programmed now.

I have superior working experience for getting Autel MS908 Professional on obd2tool.com web-site, they could provide you two several years free of charge udpate on line
and offer you you the very best service: sales@obd2tool.com

Autel MaxiSYS MS906 Employing Working experience

The Autel MaxiSys MS906 has a lot of attributes that some are sure to generally be extremely useful. It has Good AutoVIN that may detect the VIN quantity out of your car’s Eu the majority of the time

I have been searching for a replacement scan tool for a while now, and stumbled on the Autel MaxiSys MS906 Scan Device on the net recently.

To generally be straightforward, I haven’t listened to much concerning this model but I know another store proprietor nearby which includes the Autel DS708 scan tool, and he has nothing but good factors to say about this.

That is apparently their newest and best model to exchange the DS708, and that is slower thanks to currently being Windows-based, features a a bit smaller sized screen with worse resolution, along with a restricted variety of suppliers it could possibly access.

So, right after considerably investigation, I took the plunge and bought it on the web.

Here’s my background.

I’m a small car repair shop owner in Denver, Colorado.

I’ve been a hands-on technician for over 10 years and have dealt with essentially each auto maintenance situation you may assume of.

I've 5 techs that operate with me. We perform on all will make and types, and many of my prospects have vehicles fewer than a decade aged.

I needed a scan device that was effective at accomplishing each aspect with the work, regardless of what make my customer has.

From the description, it looked like the Maxisys MS906 Scanner could do just that.