OBDSTAR X300 PRO4 programs Hyundai i40 remote successfully

Have 2013 Hyundai i40, the key starts the car, put the buttons don’t work, so I’m going to use the OBDSTAR X300 Pro4 to program the key.

Put into the OBD port.

Select from vehicle.

Europe.

i40 is here.

I can “Select from type”, then “Remote”.

16pin obdii connector.

Type 1.

Program remotes.

It says “Switch ignition on and then switch ignition off and remove key, press ENTER to continue.

Press LOCK or UNLOCK for more than 1 sec.

Program success, whether to program next one?

Press [Enter] to continue.

Esc and it displays ” Program complete”.

Power off OBDSTAR X300 PRO4.

Unplug the OBD2 cable and to test the remote.

You see it is working

Okay, very good programmer OBDSTAR X300 PRO4.

Autel Scanners Registration, Update, Language and Error FAQs

Here are the Autel all series diagnostic scanners registration, update, language change, common problems frequently asked questions and answers provided by Autel engineers.

Registration:

Q1: How to register Autel ID?
A1: Go to Autel website to register your Autel ID with email address: https://pro.autel.com/regCustomerInfo.html?operationType=1&m=1

Q2:. How can i found device S/N and register password?
A2: Go to Product Registration to register your scanner, input the S/N and register password (both can be found on the About page of the tool)
If cannot turn on scanner, send S/N (on the back of the machine) to Autel support, they will send you the register password in their server.

Q3: How to register Autel tablets MK808, MP808TS, Maxisys series?

A3: Autel tablets registration is done within the tablet. Press register and follow system instructions.

Q4: How to register Autel autolink scan tools?

A4: These autel hand-held scanners don’t require registration, including AL319，AL419，AL439, AL439B, AL539, AL539B, AL519, TS401 and MS609.

Update:

Q1: How to Update Autel Maxisys, DS808, MK808, MP808TS etc tablets?

A1: Connect Autel tablet with network via WiFi or WLAN cable connection, Go to Update function, select the software you desire to update. Press Update and wait until it completed.

Check: How to Register and Update Autel MaxiSys tablets?

Q2: How to Update Autel scanners MD802, AL619, MD808, MaxiCheck Pro etc?

A2:

1).Download maxi pc suite to laptop: http://support.autel.com/support/solutions/folders/8000079030

2.) Remove SD card (recommend update by SD card rather than USB). Insert a SD card reader with laptop via USB port.

3). Run Maxi PC Suite, login, then you will get software list, pls install all programs you need.

4). Insert SD card back to the scanner and check the result.

5). If you have any problems with the update, pls kindly send us the S/N and pictures with error message for troubleshooting.

Maxi Pc Suite
Check detail guide here: How to Update Autel MaxiDiag, MaxiCheck etc Software?

Q3: How to Update Autel autolink AL319 AL419 AL519 scanners that without S/N?

A3:

1). Download MaxiilinkII on official website: http://support.autel.com/support/solutions/folders/8000079030

2). Connect scanner with laptop via USB cable, run MaxilinkII

3). Select scanner model in MaxilinkII. Check the green icon appears on the right top corner and displays device connected.

4). In official website, select Products- Download, download and unzip update tool. Select corresponding update file in maxilinkII to update.

Note* update contains 2 parts. Make sure complete all 2 parts.

5). Update finished. Remove USB connection.

Maxilink Ii

Language:

Q1: How to change language for Autel MK808, MX808, DS808, Maxisys series?

A1: Send S/N to us. Autel support team will change language on their server.

After change language on server, go to official website and download software on Update page.

If there is no upgradeable software on Update page, run a factory reset first (System settings—Reset—Factory reset) , then download software under Update page.

Device language is changed when download software finished.

Q2: How to change language for Autel hand-held scanners MD802 AL619 etc?

A2: Send S/N to us. Autel support team will change language on their server.

After change language on server, format the SD card, run Maxi pc suite and update all software again (same procedure as update).

Q3: How to update Autel autolink scanners AL319, AL419, AL439, AL439B, AL539, AL539B, AL519 that without S/N?

A3: Download corresponding language pack on official website. Then run MaxilinkII to update software.

Common Problems & Errors

Q1: I failed to register Autel Scanner. Why?

A1: The most common reason is the wrong register password (many people entered the register ID by mistake ).

Register password: 6-digit number can be found on device About interface.

Better provide us whole registration interface to tell what information you entered is wrong.

Q2: Autel can read fault code but cannot clear fault code?

A2: Autel reads the fault code., You need to get problem solved, otherwise the fault code still exists.

Q3: Autel does not work on my car?

A3: If cannot work on specific model or function, it can be software or operation issue. Please upload datalog to server with vehicle model, year, VIN code and problem.

If all car software fail to work, check physical connection, check main test cable and VCI connection.

If a specific software fail to work, check the related OBD connector or download and install this software again.

Q4: Communication failure. How do i know if it is caused by VCI or hardware connection?

A4:

1). Connection MaxiSys host with VCI via USB to check if it communicates.

2). Test more vehicles.

3). Test EOBD software

4). Change main test cable and VCI to make a comparison.

Q5: Hand-held Autel scanner ask to obtain authorization or give error SD Card dismatch?

A5: Language incorrect or SD card (Serial number does not match, take SD card from other machine).

1). Make sure language setting is correct.

2). Format SD card and use correct Autel ID (provide us S/N to get correct ID)

3). Usually download software, format SD card can solve the problem.

Q6: Maxisys has stopped, how to reflash maxisys system?

A6: Provide us your scanner S/N, we’ll send you reflash file.

Please uncompress/unzip the files first, copy the folder “autel_factory” or “autel_factory_dev” to an empty TF card. Insert the TF card to the left side slot of Maxisys, restart the tool to flash the system.

Q7: How to get system log when strange system error occurs ?

A7: Restart the scanner to re-produce the problem, once the problem occurred, pls go to the home screen, click on MaxiTools button, click on the Start button, wait for it to finish, then click on Upload to send the log to Autel server. You can try this procedure several times to ensure we receive the complete logs.

Keep updating…

Using GM Tech2 to disable seatbelt alarm, program DDM, add modules

Recently, we have quite a few future-buyers asking about GM Tech2 Scanner. Here obd2eshop would like to share a simple guide for SAAB with pictures for GM Tech2 beginners. To use the scanner on SAAB, you will need a 32MB PCMCIA card. Some functions are hidden and work in conjunction with other functions (like rolling locks, keyout unlock).

How to connect Tech2 scanner to SAAB OBD port
1.DLC cable connection
2.SAE 16/19 pin adapter (P/N 300098)
How to turn off seat belt alarm:
This function is in “Most Common Adjustments”
Select your Saab year and model then select all.
Make sure your key is set to On.

Select F5. Most Common Adjustments
This brings you to:

Select Seat Belt Reminder = Off
How to Program DDM, Enable Comfort Open/Close, Learn Pinch
Prerequisites:
Security via TIS2000! Without this you would not be able to add anything!!!

Go to main menu, select F0: Diagnostics and then select your model and year.

Select F7: Add/ Remove

How to add modules

Thanks for reminding me Tech2! I will do this down below!

Looks like Tech2 caught an error! Passenger door’s anti-pinch was disabled somehow… It fixes it automatically.

So that was pretty straight-forward right? Now hit Exit and go back. We have to setup pinch protection under the service tab…

Holy Cow! My fingers almost were chopped off!!!

That’s pretty much the same for adding all modules. I have to say, autosuggest is your best friend. If you mess up adding wrong part, the ECU will catch the mismatch. Bonus.
This guide was originally posted in saabcentral forum.

Is possible to change idle speed with GM Tech II

Possible to raise and lower idle speed using a Tech II Scanner?
Look here – questions and answers from users and technicians
2003 escalade, found a TSB regarding rough idle, I need to raise and lower the idle by +/- 50 rpm. How do I do this with a Tech 2?
For the 2003, if the tsb refers you to a new calibration you might able to reprogram with tis2000 (depends on the tsb date).
Note that things can’t be done with the scan tool alone.
2011 escalade would like to know how to do a VIN reprogram/ relearn for the radio.
For the 2011 you’ll need tis2web.
Note that things can’t be done with the scan tool alone.
Is it possible to adjust the idle rpm with the GM Scanner Tech II?
You cannot change your idle rpm with the Tech 2. On some vehicles you can raise and lower the rpm by controlling the iac motor, but only for diagnostic purposes.
What do I need to be able to change my idle speed for cold conditions . ECM program adjustment? should be able to control it with cruise control switch correct?2002 GMC duramax 2500HD . (1GTHC23182F202689 – 2002 GMC VIN.)
your vehicle can the ecm reprogrammed for the fast idle increase. your local dealer should be able to help you out.
Which one Tis2000 will support escalade 2009 to reprogram with Tech2?
For 2009 you will need an online subscription.
I’m trying to change the idle speed on a 98 camro m6, ls1, with a big cam for a friend of mine.
Can anyone enlighten me as to the proper procedure to adjust it with a GM tech 2? He wants it specifically set with the ecm.
You cannot do it with a TECHII. Simple as that. What you want to do is considered editing, and you cannot edit with a TECHII. Period.
Only thing you can do with a TECHII is upload GM specific files, tunes, updates, whatever you want to call them.
Raising of the idle can be done using the bi-di controls in the scanner function, but it does not burn it to the memory.
Drilling a hole in the T-body does you no good, because without raising the idle in the tune, the IAC will just close up more, trying to get the idle back down to the desired speed.
I assume the same is true for changing the rear gear ratio?
You can change gear ratios by changing RPOs. Totally different thing. Thats still not editing. It’s changing what the computer thinks the car came with from the factory.
You cannot tell the computer the car has a 4.56. You cannot change the idle.
To correctly change the idle, you need to increase the base idle airflow, as well as the idle speed. You need to purchase a tuner suite. HPtuners or EFIlive.
Is it possible for GM vehicles to get the ecm reprogrammed for the fast idle increase. your local dealer should be able to help you out. How it works?
Connect the Tech 2 and follow the steps below to program the ECM for idle up feature with PTO operation:
Turn on tech 2 and build the vehicle
select “Powertrain” (Or “Vehicle Control Systems” on later models)
select “Special Functions” (or “Module Setup” on later models)
select “PTO Options”
select “Change Options” (soft key at bottom of the screen)
select F1 “PTO Preset Speed Control”
select pto max engine speed set to 2200 – 4400 rpm (not below 2200)
Note: These steps will not allow the engine rpm to exceed the rpm setting, even during normal driving if the PTO switch is on
select stand by speed (base fast idle ) set to 1200 (this setting is initial fast idle)
select PTO set speed – set to 1400 rpm
select PTO resume speed – set 1700 rpm
select PTO max engage speed – set to 1800 rpm (PTO engagement inhibit speed)
select PTO engine shutdown – no
select PTO engage relay – no
select PTO feed back -no
select “Reprogram” (soft key at bottom of screen) “Waiting For Data” displays on screen-once data comes back verify settings remain
key off- until tech 2 “beeps” and screen shows “no communication” (Very important step if missed setting will not store)
key on – verify settings remain on list
operate pto
loading..