Autel IM608 Read Immo Data from BMW FEM M95128

In this introduction,OBD2TOOL will show you guide on how to useAutel MaxiIM IM608 to read out immobilizer data from BMW FEM M95128 chip.
Procedures:
Connect XP400 programmer to Autel IM608 tool,then use APA103 clamp to connect EEPROM to XP400.

Then select “IMMO”–>”BMW”–>”System Selection”–>”Immobilizer”
Select “FEM/BDC immobilizer”

Select “EEPROM operation”

Here you can select “Diagram” to check the connection

FEM-M95128

Scroll download to check “BDC M95256”

And position of pins on EEPROM

In this expamle,it is M95128,here we back to menu to select “95128”

Select “Read operation”

Reading EEPROM,please wait…

When finish,you can save it.

Autek iKey820 Program New Key for Honda Accord 1996

In this instruction,i will show you guide on how to useAutek IKey820 to program new key for Honda Accord 1996.
Procedures:
Connect Autek iKey820OBD key Programmer to OBD port,then enter menu to select “KEY PROGRAM”

Select “HONDA”–>”BY VEHICLE”–>”ACCORD”–>”key(type 2)”




Then turn ignition on

Input the amount of keys to be programmed “1”


Turn ignition off

Insert a new key and turn ignition on

Configuring system,please wait…

Wait 17 seconds,turn ignition off

Please wait about 10 seconds

Is the immo light out?
Press [OK] to continue

Turn ignition off
Turn ignition ON

Now it will prompt you “Success”

Test new key.
More information about Autek iKey80,please refer to:
https://www.obd2tool.com/goods-10142-2018-Original-Autek-IKey820-OBD2-Car-Key-Programmer.html