X-431 GDS

Launch X431 GDS , Launch GDS ,X-431 GDS

Autel IM608 Read Immo Data from BMW FEM M95128

2020-02-08 17:27:51 | 日記
In this introduction,OBD2TOOL will show you guide on how to useAutel MaxiIM IM608 to read out immobilizer data from BMW FEM M95128 chip.
Procedures:
Connect XP400 programmer to Autel IM608 tool,then use APA103 clamp to connect EEPROM to XP400.
Autel-IM608-Read-Immo-Data-from-BMW-FEM-M95128-1
Then select “IMMO”–>”BMW”–>”System Selection”–>”Immobilizer”
Select “FEM/BDC immobilizer”
Autel-IM608-Read-Immo-Data-from-BMW-FEM-M95128-2
Select “EEPROM operation”
Autel-IM608-Read-Immo-Data-from-BMW-FEM-M95128-3
Here you can select “Diagram” to check the connection
Autel-IM608-Read-Immo-Data-from-BMW-FEM-M95128-4
FEM-M95128
Autel-IM608-Read-Immo-Data-from-BMW-FEM-M95128-5
Scroll download to check “BDC M95256”
Autel-IM608-Read-Immo-Data-from-BMW-FEM-M95128-6
And position of pins on EEPROM
Autel-IM608-Read-Immo-Data-from-BMW-FEM-M95128-7
In this expamle,it is M95128,here we back to menu to select “95128”
Autel-IM608-Read-Immo-Data-from-BMW-FEM-M95128-8
Select “Read operation”
Autel-IM608-Read-Immo-Data-from-BMW-FEM-M95128-9
Reading EEPROM,please wait…
Autel-IM608-Read-Immo-Data-from-BMW-FEM-M95128-10
When finish,you can save it.
Autel-IM608-Read-Immo-Data-from-BMW-FEM-M95128-11

コメントを投稿