仮組み。
某著名サイトの通りに舵角調整しようとしたら片方エルロンロッドがつっかかってる・・ロッド調整しなおし。
☆加納さんとこのデータ
Ailerons: ↑ 15 mm, ↓ 6 mm
Rudder: right/left 10 mm
Elevator: ↑ 10 mm, ↓ 10 mm
Butterfly: flaps ↓ 50 mm, aileron ↑ 10 mm, elevator ↓ 7 mm
Thermal: ailerons and flaps ↓ 3 mm
Speed: ailerons and flaps ↑ 1 mm
☆RC Groupsのデータ
Ailerons: ↑ 18 mm, ↓ 9 mm
Rudder: right/left 18 mm
Elevator: ↑ 11 mm, ↓ 9 mm
Butterfly: flaps ↓ 43 mm, ailerons ↑ 12 mm, elevator ↓ 6 mm
Soaring: ailerons and flaps ↓ 5 mm, elevator ↓ 2 mm
Speed: ailerons and flaps ↑ 3 mm, elevator ↑ 1 mm
Elevator neutral point 78 mm measured from bottom of fuselage to trailing edge.
(What they mean is if you put the plane flat on a surface, the measurement is taken from the trailing edge of the elevator to the surface)
Center of Gravity 106-108 mm from leading edge
上記でテールのニュートラルを合わせたらこんな位置です。
調べずに適当に真ん中合わせで投げてたらガクブル・・・(封印
某著名サイトの通りに舵角調整しようとしたら片方エルロンロッドがつっかかってる・・ロッド調整しなおし。
☆加納さんとこのデータ
Ailerons: ↑ 15 mm, ↓ 6 mm
Rudder: right/left 10 mm
Elevator: ↑ 10 mm, ↓ 10 mm
Butterfly: flaps ↓ 50 mm, aileron ↑ 10 mm, elevator ↓ 7 mm
Thermal: ailerons and flaps ↓ 3 mm
Speed: ailerons and flaps ↑ 1 mm
☆RC Groupsのデータ
Ailerons: ↑ 18 mm, ↓ 9 mm
Rudder: right/left 18 mm
Elevator: ↑ 11 mm, ↓ 9 mm
Butterfly: flaps ↓ 43 mm, ailerons ↑ 12 mm, elevator ↓ 6 mm
Soaring: ailerons and flaps ↓ 5 mm, elevator ↓ 2 mm
Speed: ailerons and flaps ↑ 3 mm, elevator ↑ 1 mm
Elevator neutral point 78 mm measured from bottom of fuselage to trailing edge.
(What they mean is if you put the plane flat on a surface, the measurement is taken from the trailing edge of the elevator to the surface)
Center of Gravity 106-108 mm from leading edge
上記でテールのニュートラルを合わせたらこんな位置です。
調べずに適当に真ん中合わせで投げてたらガクブル・・・(封印