Earlier lot has been gaining more and more specular reflection as coating continues, as shown above.
Yesterday's materials were planed today, cut into individual pieces and sanded into tapered pieces as shown below successively.
These pieces are here before being sanded into into tapers. They were cut using the mini table saw I talked about earlier.
Tapered beech pieces. Notice that heat induced dark blotches have completely disappeared from beech pieces.
Walnut pieces on top. Once you get to this stage of tapered pieces it is not too time consuming to turn them into their final shape. You only need to lose a small amount of material from the edges.
First of the serious attempts at the snack beds is shown below. I will need to complete 5 of these to form a gift set. I need to complete this task before setting off to Denpasar next month.
I am aware that I have not carried a movie about arc welding. I intend to do just that with wheels and a 12mm axis, as shown below. I have a smasher with two wheels, but it is very heavy and I could easily do with another two wheels.
My intention is to weld this 12mm soft iron rod to the bottom of my smasher and then further weld two nuts as the wheel stopper, nearer the body, that is.
