『モノラルを楽しく聴きたい!vol.8』の続きです。
『モノラルを楽しく聴くアダプター』を作ってみました。
とりあえずは、特性のチェックをするために
メイン回路のみ作りました。
![](https://blogimg.goo.ne.jp/user_image/61/73/657fd34728b76e33485a79653da23f9c.jpg)
オペアンプは1つのパッケージに2つの素子が入っています。
今回は松下のAN6556を使用しましたが
他のオペアンプでも使用できます。
抵抗は全て1/4Wのカーボン抵抗
コンデンサーは0.22マイクロがフイルムコンデンサー
4.7マイクロが電解コンデンサーです。
これは無極性タイプを使用します。
ボリュームは5KオームのBタイプを使用しました。
![](https://blogimg.goo.ne.jp/user_image/51/e6/e71c2143bfd31baa0c4b0fbc69d770ad.jpg)
回路図だけ見ると複雑ですが
![](https://blogimg.goo.ne.jp/user_image/12/89/3ff58af52f0682b25db7142b63283439.jpg)
意外とシンプルだとおもいませんか?
次回に続きます。
It is happily heard by a mono! vol.9
It is a continuation of "It is happily heard by a mono! vol.8"
"The adapter which hears a monophonic recording happily" was made.
First, only the main circuit was made for the check of the characteristic.
![](https://blogimg.goo.ne.jp/user_image/61/73/657fd34728b76e33485a79653da23f9c.jpg)
As for the operational amplifier, two elements are carried in one package.
AN6556 was used this time.
Other operational amplifiers can be used.
All resistors are carbon resistance machines of 1/4W.
By a capacitor, 0.22 micro is a film capacitor.
4.7 micro is an electrolytic condenser.
This uses a nonpolar type.
Volume used 5K-ohm B type.
![](https://blogimg.goo.ne.jp/user_image/51/e6/e71c2143bfd31baa0c4b0fbc69d770ad.jpg)
If only a circuit diagram is seen, it will be thought that it is complicated.
![](https://blogimg.goo.ne.jp/user_image/12/89/3ff58af52f0682b25db7142b63283439.jpg)
Don't you think that it is simple?
To be continued.