SunSDR 2 + skimmer from SDC

Although this info is setting skimmer from SDC with SunSDR 2 not SunSDR 2 Pro, it is worth to keep info for future reference.

Original info from EW8AX.

http://www.ew8ax.info/blog/view.php?id=141



Setup is not difficult, but it is difficult to figure out right away.

Download and run the SDC (forum where you can find a link to the latest version from the author)

Version ExpertDR2 must be with support for TCI. These are the latest beta and 1.2.0 rc / rc2.

In the settings ExpertDR2 we enable TCI(Transceiver control interface )



Setup is not difficult, but it is difficult to figure out right away.

Download and run the SDC (forum where you can find a link to the latest version from the author)

Version ExpertDR2 must be with support for TCI. These are the latest beta and 1.2.0 rc / rc2.

In the settings ExpertDR2 we enable TCI



Set up a client's telnet and spot coloring:





Open the SDC:

I'm set to autorun. Those. As soon as I start the SDC, the telnet server and the skimmer server start right away.


Settings telnet server - register the client's call sign, arrange the birds.



Settings of the skimmer-server - we arrange the birds, thoughtfully read the inscriptions and the forum, setting it up for ourselves.



Checking TCI on the SDC side




To see the result of the settings - click on the SKM button in the Expert SDR2

Expert SDR connects as a client to the SDC and gets spots from it.

We see that the first client appeared on our telnet server.



Further visible in the panorama of the spot spot, I have them green.

In addition to our skimmer, we can configure a connection to reversebeacon.net (telnet.reversebeacon.net:7000)





Our skimmer spots will be green, world spots from reversebeacon.net are yellow.

追記

SDCの日本語翻訳がEDC社から出ていたので参考に追記しておきます

http://www.edcjp.jp/Tec-inf/Data/TC-SDC.pdf

SunSDR2 & SDC - we share CAT over the network

Some info from EW8AX for future reference.
Please note that he configure as below with Sun SDR 2 not Sun SDR2 Pro so configuration may different.



There was a task to share CAT transceiver over the network. The chip is widely demanded in narrow circles. I tried a lot of any software, but the version from FabulaTech, which proved to be excellent. Options worked unstable or did not work at all.

In the light of the search, I had to get acquainted with the wonderful software from UT4LW called SDC aka Software Defined Connectors

This software (SDC) assumes the latest version of ExpertSDR2 and the recently implemented TCI aka Transceiver control interface protocol.

It was on the basis of SDC that I was able to realize my plans, but precisely because the SDC itself was designed for such opportunities. And in the future I plan to completely switch to SDC by rejecting other port splitters and port sharing.


So, the tincture of the server part. PC on which there is ExpertSDR2, SDC, magazine, contest log etc.



(all pictures in high resolution and what to consider can be opened in a separate window)

The task of the server part is using SDC to share the computer port on the network. I have this COM8.



Further, on the client PC, I have this MSI laptop, we create the response part:



Where 192.168.0.100 is the IP of the server machine.

Port A - connects to the server and sends data to port B.
Port B - receives data from port A and is used for local software operation.