SunSDR 2 configure DIGITAL

Some info from EW8AX for future reference.
Please note that he configure as below with Sun SDR 2 not Sun SDR2 Pro so configuration may different.
Some info from EW8AX for future reference.
Please note that he configure as below with Sun SDR 2 not Sun SDR2 Pro so configuration may different.

I don’t know what the problems may be here ... I haven’t come across it yet, but they say that people suffer and cannot adjust. Therefore, I will give my settings, entirely one more time and with comments, maybe this will help someone. So...

com0com



I have three groups of ports
The first is for controlling the cat, the second for CW, the third separately for turning on the TX on the transceiver. Why is that? Because not all the software is able to turn on the transceiver for transmission by cat. I had to make a crutch for the poor fellows.

For the numbers we need the first and third group. COM4 from the side of the transceiver, read ExpertDR2, COM8 - software.

I explain:






I hope this is a pretty obvious example. Those. In this configuration, OMNIRIG works, which is known as "there is life." Further, all the software is set up to use OMNIRIG.

UR5EQF:



The whole log already works through OmniRig, the main thing is not to forget to configure PTT!

WSJT-X:



Quite wonderful in his work through OMNIRIG and WSJT-X. We expose the settings, click TEST CAT, it will turn green. Then TEST PTT, it is redder and will turn on the transceiver for transmission. Didn't notice any problems with WSJT-X ...

JT65: (JT-65 HF Version 1.0.9.3)

It's all bad, in a sense. This guy wants a separate port for the TX, and he needs to be given it. I don’t know what the author’s problems were, I don’t have them.




If you need, then you need. I use a pair of ports 2 and 9.

2 - from the side of ExpertSdr2, 9 - registered in the settings of JT-65 HF Version 1.0.9.3. With the old transceiver, I used the HamRadioDeluxe option. Great program, but its time has passed ...

ROS:



As I wrote examples I remembered ROS, updated the version and connected it. Works both through CAT, and through the indication of the COM port. Again, no problem :)

By analogy with these examples, you can probably configure something else, but I do not seem to use anything else ...: D


Ps. For gourmets:

In order that in a similar configuration with CAT, besides OMNIRIG, any other programs SIMULTANEOUSLY work, it is required to use "port sharing" or its analogues. What is it and how I have implemented, you can see there. Look for red text about splitter (!).